Table of Contents
Advertisement
WARNING
Do not open the cover
unless totally familiar with
electrical circuits and
service manual.
Improper handling can result
in electrical shock.
Turn off the power at the ship's mains
switchboard before beginning the
installation. Post a warning sign near
the switchboard to ensure that the
power will not be applied while the
equipment is being installed.
Serious injury or death can result if the
power is not turned off, or is applied while
the equipment is being installed.
ii
Safety Instructions for the Installer
www.Busse-Yachtshop.de
CAUTION
Ground the equipment to
prevent mutual interference.
Confirm that power supply voltage
is compatible with the voltage rating
of the equipment.
Connection to the wrong power supply can
cause fire or equipment damage. The
voltage rating appears on the label at the
rear of the equipment.
Observe the following compass safe
distances to prevent interference to a
magnetic compass:
Standard
compass
0.5 m
NX-300
email: info@busse-yachtshop.de
Steering
compass
0.3 m
Advertisement
Table of Contents
