Table of Contents
Advertisement
2.1 Control Description
All operation of the NX-300 is carried out with the controls on the front panel of the display unit.
FURUNO
Removing the hard cover
To remove the hard cover, squeeze
it at its top and bottom right (or left)
corners and pull it toward you.
Pressure
Pressure
2.2 Turning the Power On/Off
Turning on: Press the [PWR] key. "NO MESSAGE" (message waiting screen) appears. When a
message is received, it appears on the screen and in case of a long message, it scrolls
continuously.
To confirm version number of the equipment, press the [PWR] key a little longer. Release the
key when the following window appears.
Turning off: Press the [PWR] key for 3 seconds.
Note: The NX-300 should be turned on for the duration of a voyage so that important warning
messages will not be missed.
ENT
MENU
DISP
DIM
PWR
Opens menu or
message display.
Opens message
selecting display
or navigational
data display.
Figure 2-1 Control panel
Figure 2-2 TURNING ON window
Figure 2-3 TURNING OFF window
www.Busse-Yachtshop.de
2. OPERATION
MENU
ENT
Adjusts panel dimmer
DISP
DIM
and contrast.
Selects 518 kHz or 490 kHz.
FREQ
(See page 2-12.)
PWR
Touch and release: Turns power on.
XX-Version no.
email: info@busse-yachtshop.de
Omnipad
• Shifts cursor and display.
• Selects items on menus.
Registers items on menus.
Long press: Turns power off.
2-1
Advertisement
Table of Contents
