Troubleshooting ...........................25 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
www.electroluxaircomfort.com 3 CONGRATULATIONS! Congratulations and thank you for choosing a Conditions of Use split-type air conditioner. We are sure you will This appliance is intended to be used in fi nd your new air conditioner a pleasure to use. household and similar applications such as: •...
4 www.electroluxaircomfort.com SAFETY PRECAUTIONS Inside this manual you will fi nd many helpful Do not damage or cut off the power cord hints on how to use and maintain your air or other wires. If this occurs, please have conditioner properly. it repaired or replaced by an accredited technician Just a little preventive care on your part can...
Page 5
www.electroluxaircomfort.com 5 SAFETY PRECAUTIONS Usage Caution • Exposure to direct airfl ow from the air Select the most appropriate temperature. conditioner for an extended period of time It can save electricity. could be hazardous to your health. • Do not expose people, pets or plants to the Do not keep windows and doors open for direct airfl...
www.electroluxaircomfort.com 7 INDOOR UNIT DISPLAY 1. HEAT operation indicator - It lights when the operation mode is HEAT. 2. COOL operation indicator - It lights when the operation mode is COOL. 3. Temperature indicator - Displays the temperature settings when the air conditioner Caution is in operation.
8 www.electroluxaircomfort.com QUICK START GUIDE the high speed to allow for rapid cooling or heating. Special functions X-FAN After the unit is turned off the indoor fan will continue operation for 10 minutes to remove the moisture of the indoor unit to avoid the growth of mould and bacteria.
Page 9
www.electroluxaircomfort.com 9 3. Control Button: Forward - Press the button to increase the temperature setting. Holding this button down for 2 seconds and more will increase the temperature setting more quickly. Maximum setting is 30°C. In Timer On/Off or Clock functions, use this button to set the clock or timer adjustment.
Page 10
10 www.electroluxaircomfort.com the louvre will stay at its last position. after 7 hours, the temperature will be 9. Quiet Button - Press this button the indoor decreased a further 1°C, after that the unit fan operates at ultra-low speed, the indoor will keep running at this temperature;...
www.electroluxaircomfort.com 11 Press this button again to cancel the Timer 3. The hour of sleep mode will be automatically On function, and symbol will disappear. increased on the remote control, to the 2nd, Confi rm the Timer On settings by pressing 3rd hour of sleep mode and so on with each Timer On button, or wait for 5 seconds after press of the Turbo button;...
12 www.electroluxaircomfort.com 5. Mode Display - Displays the current and press ON/OFF button to turn the unit operation mode in the following sequence: on. The default operating mode is AUTO. Once you select the operating mode with remote control, the operating conditions will be saved in the indoor unit’s microcomputer memory.
Page 13
www.electroluxaircomfort.com 13 Start 1. ON/OFF Button - Press this button to turn the air conditioner on. The temperature indicator on the indoor unit display lights on. 2. Mode Button - Press to select AUTO. Stop 1. ON/OFF Button - Press this button again to turn the air conditioner off.
Page 14
14 www.electroluxaircomfort.com Stop 1. ON/OFF Button - Press this button again to turn the air conditioner off. The horizontal louvre returns back to the position upon shut down. Stop 1. ON/OFF Button - Press this button again to turn the air conditioner off. The horizontal louvre returns back to the position upon shut down.
Page 15
www.electroluxaircomfort.com 15 Cancelling the Settings Point the remote control to the indoor unit and press again the Timer-On button. Make sure the symbol on the remote control is turned off. 3. Confi rm the set time by pointing the remote control to the indoor unit and pressing again Timer Off Operation the Timer On button.
Page 16
16 www.electroluxaircomfort.com 3. Confi rm the set time by pointing the remote function is activated. control to the indoor unit and pressing again the Timer On button. 4. Press the Timer Off button. Setting the Clock 5. Set the desired time by pressing repeatedly or holding down the Control buttons until 9:30AM shows in the display of the remote control.
www.electroluxaircomfort.com 17 Tips and Information Tips and Information • The clock timer uses a 12 hour clock mode. • The default setting for remote control is ON • The default time for remote control is when the remote control is turned on. 12:00PM and it will revert to this when the •...
Page 18
18 www.electroluxaircomfort.com 3. When the louvre moves to the desired direction, press the Swing button again and the louvre will stay at where it is. 4. Press the Swing button again and the louvre will start swing up and down automatically. 4.
www.electroluxaircomfort.com 19 EMERGENCY OPERATION OPERATING TEMPERATURE When the remote control is lost or fails to The operation temperature range is as below: operate, please use the manual switch on the Indoor Side Outdoor Side indoor unit. The air conditioner will operate in DB/WB(°C) DB/WB(°C) AUTO mode and the temperature setting or fan...
20 www.electroluxaircomfort.com CLEANING AND Items Maintenance Recommended operations frequency MAINTENANCE Dust fi lter Clean Every month or more often if necessary Battery Installation/Replacement Plasma dust Clean Every 3 months collector or more often if necessary 1. Push the back cover of the remote control. Healthy air Replace or Every 3 months...
Page 21
www.electroluxaircomfort.com 21 A clogged dust fi lter reduces the cooling/heating effi ciency of this unit. Please clean the fi lter every month or more often if necessary. 1. Lift the indoor unit front panel up to an angle until it stops with a full support from the frame.
Do not touch or try to clean the Cold Plasma Generator by yourself, and it may cause electric shock. Please contact qualifi ed personnel or Electrolux service centre for clean or replacement if necessary. 3. Carefully lift the dust box up, then pull it out of the frame of the Dust Collector.
www.electroluxaircomfort.com 23 OPERATION TIPS The following events may occur during normal operation: A white mist coming out from the indoor Protection of the air conditioner. unit • Compressor protection - The compressor • A white mist may generate due to a large can’t restart for 3 minutes after it stops temperature difference between air inlet •...
Page 24
24 www.electroluxaircomfort.com Condensation Condensate water is likely to form at the air outlet if cooling or drying for a long time when the relative humidity is more than 80% (with doors and windows open). Set the vertical louvre to its maximum angle (to the fl...
www.electroluxaircomfort.com 25 TROUBLESHOOTING The air conditioner is not user serviceable. Incorrect repair may cause electric shock or fi re. Please contact an authorised service centre for professional repair. Warning If one of the following situations occur, immediately stop the air conditioner, disconnect the power, and contact the authorised service centre.
Page 26
26 www.electroluxaircomfort.com The following checks prior to contact may save you time and money. Malfunctions Cause The unit does not operate The unit does not operate if it is turned on immediately after it is turned off. This is to protect the unit. Please wait about 3 minutes. Odours are emitted •...