Photon Specifications - FLIR Photon User Manual

1—Introduction
1.1

Photon Specifications

• 324 (H) x 256 (V) uncooled microbolometer sensor array, 38 x 38 micron pixels,
also available as a windowed 160 (H) x 120 (V) sensor array
• Input power range: 5.0 – 24.0 VDC
• Power Consumption: 1.65 Watts (nominal at room temperature using 8V input)
• Operating Temperature Range: -40° C to +80° C
• Weight: approximately 97 grams without lens
• Analog video output:
NTSC (320x240)/(160x120) or PAL (320x256)/(160x120)
Slow video output rate (approximately 9Hz) is available for exportability
• Remote camera control RS-232 interface: Photon GUI software available for free
download at www.corebyindigo.com/service/softwareupdates.cfm)
• 2X Digital Zoom with electronic pan/tilt with 324 (H) x 256 (V) sensor array
—digital zoom feature is only available for Photon 320
• Dynamic Digital Detail Enhancement (DDE)
Note: These specifications are subject to change without notice.
The latest information concerning specifications, part numbers, accessories, camera
configurations, and other information can be found in the Photon Thermal Imaging Camera
Core Data Sheet at:
http://www.corebyindigo.com/products/uncooledcores.cfm.
1-2 February 2008
Photon User's Manual
412-0035-00-10, version 110