System Components; Loudspeaker Enclosure; Powering And Driving System; Loudspeaker Cables - L-Acoustics SB18 User Manual

Hide thumbs Also See for SB18:
Table of Contents

Advertisement

1 SYSTEM COMPONENTS

The system approach developed by L-ACOUSTICS
and most predictable level of performance at any step of loudspeaker system deployment: modeling, installation, and
operation. A complete L-ACOUSTICS
software applications.
1.1

Loudspeaker enclosure

SB18
Subwoofer enclosure, down to 32 Hz.
Loudspeaker system design
Sound design aspects are beyond the scope of this document. However, the various applications of the
system will be based on the loudspeaker configurations presented in this document.
1.2

Powering and driving system

LA4,
Amplified controller with DSP, preset library and networking capabilities
LA4X, LA8
LA-RAK
Touring rack containing three LA8, for mains, audio signals and network distribution
Operating instructions
Refer to the LA4, LA4X, LA8 or LA-RAK user manual.
1.3

Loudspeaker cables

DO cables
(DO.7, DO10, DO25)
DOSUB-LA8
DO3WFILL
SP cables
(SP.7, SP5, SP10, SP25)
SP-Y1
Information about the connection of the enclosures to the LA amplifiers is given in this document.
Refer to the LA4, LA4X, LA8 and LA-RAK user manuals for detailed instructions about the whole cabling
scheme, including modulation cables and network.
1.4

Rigging element

Rigging elements or procedures are not presented in this document.
According to the version of the subwoofer and the system to set-up, refer to the applicable rigging manual.
1.5

Software application

SOUNDVISION
LA NETWORK MANAGER
Using L-ACOUSTICS
Refer to the SOUNDVISION user manual and the LA NETWORK MANAGER tutorial.
NomProduit_UM_0.1
®
consists in offering a global solution that guarantees the highest
®
system includes enclosures, amplified controllers, cables, rigging system and
®
8-point PA-COM
loudspeaker cables (4 mm² section).
Respective lengths of 0.7 m/2.3 ft, 10 m/32.8 ft, and 25 m/82 ft.
Breakout cable for four passive enclosures.
8-point PA-COM
®
to 4 × 2-point SpeakON
Breakout cable for one 2-way active enclosure and two passive enclosures
8-point PA-COM
®
to 2 × 2-point SpeakON
4-point SpeakON
®
loudspeaker cables (4 mm² section).
Respective lengths of 0.7 m/2.3 ft, 5 m/16.4 ft, 10 m/32.8 ft and 25 m/82 ft.
Breakout cable for two passive enclosures.
®
4-point SpeakON
to 2 × 2-point SpeakON
Provided with CC4FP adapter.
Proprietary acoustical and mechanical 3D modeling software.
Remote control and monitoring of amplified controllers
®
software
w w w . l - a c o u s t i c s . c o m
®
(4 mm² section).
®
and 1 × 4-point SpeakON
®
(2.5 mm² section).
5
®
(4 mm² section).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sb18iSb18m

Table of Contents