3.3
Connection to LA8
Maximum of 8 enclosures per LA8
2 SB18 can be connected in parallel to each output channel on the LA8. Therefore, a single LA8 amplified
controller can drive up to 8 enclosures.
Cardioid configuration
Connect the reversed subwoofers to OUT 1 to use the cardioid preset.
Impedance load
8 Ω for 1 enclosure, 4 Ω for 2 enclosures.
To connect the SB18 to the LA8, 2 options are available.
Option A
Connect a DO cable (DO.7, DO10 or DO25) to the LA8 PA-COM
Use the DOSUB-LA8 to separate the four output channels.
If necessary, use SP cables to connect additional SB18 enclosures in parallel with the first ones.
NomProduit_UM_0.1
®
w w w . l - a c o u s t i c s . c o m
connector
11