KVH Industries TracVision HD7 Installation Manual page 30

A
Continued
Modifying Settings
Follow the instructions below to use the web
browser on your PC to modify network settings.
NOTE: When setting up a wireless network, be sure
to apply security settings, such as encryption, to
protect your network from outside intrusion. If your
network is not secure, outsiders within range of your
wireless network will be able to use your wireless
connection without your knowledge.
a. Using your PC, establish an ad-hoc
connection to the ACU.
TIP: Refer to "Viewing Settings" on page 27
connection information.
b. Enter the ACU's IP address into the web
browser's address bar
c. Log in to the web interface using the
username and password below (see
Figure 43).
username: admin
password: password
d. Select the Settings tab. Then choose Edit to
modify the desired network settings (see
Figure 44).
28
Using an Ad-Hoc Connection
for
(Figure 42).
Figure 42 Entering the IP Address (Example)
http://169.254.1.2
Enter the ACU's IP Address Here
Figure 43 Web Interface Login Screen
Login Information
Figure 44 Network Settings on the Web Interface
Select to Edit
Current
Settings
admin
password