Configuring Non-Swm Receivers - KVH Industries TracVision HD7 Installation Manual

C

Configuring Non-SWM Receivers

Follow the steps below to set up the TracVision
HD7 system to use your selected satellite service,
and/or configure the non-SWM receivers for use
with the TracVision HD7 system.
Step 1 - Set the Desired Satellite Service
Follow these steps to set up the TracVision HD7
system for the satellite service provider of your
choice.
Option A - Use the Web Interface
(Recommended)
Follow the instructions below to use the web
browser on your PC to select the desired satellite
service provider.
a. Open your web browser. Ensure the PC is
connected to the ACU's network.
b. Enter the ACU's IP address into the web
browser's address bar. Then press Enter (see
Figure ).
c. Log in to the web interface using the
username and password below (see
Figure 46).
username: admin
password: password
d. Select the Settings tab. Then choose
Advanced Settings (see
e. Select the desired satellite service provider.
Then choose Change Service (see
Figure 47).
Figure 47).
Figure 45 Entering the IP Address (Example)
http://169.254.1.2
Enter the ACU's IP Address Here
Figure 46 Web Interface Login Screen
Login Information
Figure 47 Advanced Settings
Select
to Edit
admin
password
33