KVH Industries TracVision HD7 Installation Manual page 24

13
Continued
Changing Network Settings
Choose one of the methods below if you need to
change network settings (such as the IP address
or subnet mask):
• Option A - Use the Web Interface
(Recommended)
• Option B - Use the ACU Buttons
Option A - Use the Web Interface
(Recommended)
Follow the instructions below to use the web
browser on your PC to change network settings.
a. Using a PC connected to the vessel's network,
open the web browser.
b. Enter the ACU's IP address into the web
browser's address bar
c. Log in to the web interface using the
username and password below (see
Figure 33).
username: admin
password: password
d. Select the Settings tab. Then choose Edit to
modify the desired network settings (see
Figure 34).
20
Connect the ACU to the Network
(Figure 32).
Figure 32 Entering the IP Address (Example)
http://169.254.1.2
Enter the ACU's IP Address Here
Figure 33 Web Interface Login Screen
Login Information
Figure 34 Network Settings on the Web Interface
Select to Edit
Current
Settings
admin
password