Dukane 9137WU-RJ User Manual page 51

OPTION Menu (continued)
Item
MY BUTTON
MY SOURCE
SERVICE
(continued on next page)
This item is to assign one of the following function to MY BUTTON
1 and 2 on the remote control (6).
Choose 1 or 2 on the MY BUTTON menu using the ◄/► button first. Then
using the ▲/▼ buttons sets one of the following functions to the chosen button.
• RGB1: Sets port to RGB1.
• RGB2: Sets port to RGB2.
• HDMI: Sets port to HDMI.
• COMPONENT: Sets port to COMPONENT (Y, C
• S-VIDEO: Sets port to S-VIDEO.
• VIDEO: Sets port to VIDEO.
• INFORMATION: Displays the INPUT -INFORMATION- (51) or
NETWORK -INFORMATION- (64) or nothing.
• AUTO KEYSTONE
correction (38).
• MY MEMORY: Loads one of adjustment data stored (31).
When more than one data are saved, the adjustment
changes every time the MY BUTTON is pushed.
When no data is saved in memory, the dialog "No
saved data" appears.
When the current adjustment is not saved to
memory, the dialog as shown in the right appears.
If you want to keep the current adjustment, please press
the ◄ button to quit. Otherwise loading a data will overwrite the current adjusted condition.
• ACTIVE IRIS: Changes the active iris mode.
• PICTURE MODE: Changes the PICTURE MODE (27).
• FILTER RESET: Displays the filter time reset confirmation dialogue (48).
• AV MUTE : Turns the picture and audio on/off.
• TEMPLATE: Makes the template pattern selected to the
TEMPLATE item (46) appear or disappear.
• PbyP SWAP: Swaps the picture of right side with left side in the
PbyP mode (25).
• MY IMAGE: Displays the MY IMAGE menu (63).
This item is to assign an input signals to MY SOURCE /
DOC. CAMERA button on the remote control (6, 19).
Using the ▲/▼ buttons sets one of the following input
signal.
RGB1 ó RGB2 ó HDMI
VIDEO ó S-VIDEO ó COMPONENT
Selecting this item displays the SERVICE menu.
Select an item using the ▲/▼ buttons, and press the ► button or
the ENTER button on the remote control to execute the item.
FAN SPEED ó AUTO ADJUST ó
FACTORY RESET ó INFORMATION ó REMOTE FREQ. ó REMOTE RECEIV. ó KEY LOCK
FAN SPEED
Using the ▲/▼ buttons switches the rotation speed
of the cooling fans. The HIGH is the mode for use at
highlands etc. Note that the projector is noisier when
the HIGH is selected.
HIGH ó NORMAL
Description
: Performs automatic keystone distortion
49
OPTION Menu
/P , C /P
B B R R
FILTER MESSAGE
).