Dukane 9137WU-RJ User Manual page 38

INPUT Menu
INPUT Menu (continued)
Item
FRAME LOCK
RGB IN
(continued on next page)
Set the frame lock function on/off for each port.
(1) Use the ▲/▼ buttons to select one of
following ports.
QUIT ó RGB1 ó RGB2 ó HDMI
(2) Use the ◄/► buttons to turns the frame
lock function on/off .
TURN ON ó TURN OFF
• This item can be performed only on a signal
with a vertical frequency of 50 to 60 Hz.
• When the TURN ON is selected, moving pictures are displayed
more smoothly.
Set the RGB input signal type for the RGB port.
(1) Use the ◄/► buttons to select the RGB
port to be set.
RGB1 ó RGB2
(2) Use the ▲/▼ buttons to select the RGB
input signal type.
AUTO ó SYNC ON G OFF
• Selecting the AUTO mode allows you to input a sync on G signal
or component signal from the port.
• In the AUTO mode, the picture may be distorted with certain
input signals. In such a case, remove the signal connector so that
no signal is received and select the SYNC ON G OFF, and then
reconnect the signal.
Description
36