Temporarily Blanking The Screen - Dukane 9137WU-RJ User Manual

Operating

Temporarily blanking the screen

1.
Press the BLANK button on the remote control.
The blank screen will be displayed instead of the screen of
input signal. Please refer to the BLANK item in SCREEN
Menu (42).
To exit from the blank screen and return to the input signal
screen, press the BLANK button again.
● The projector automatically exits from the BLANK mode when some control
buttons are pressed.
CAUTION
on, use the BLANK function above. Any other method of blocking the projection
light, such as attaching something to the lens or placing something in front of the
lens, may cause the damage to the projector.
NOTE
• The sound is not connected with the blank screen function. If necessary,
set the volume or mute first.
►If you wish to have a blank screen while the projector's lamp is
24
LASER
INDICATOR
STANDBY/ON VIDEO RGB
MY SOURCE/
DOC.CAMERA
SEARCH
BLANK LASER
ASPECT
ENTER
PUSH
PAGE UP PAGE DOWN
ESC MENU RESET
PbyP
POSITION AUTO
MAGNIFY MY BUTTON VOLUME
ON 1
+
2
OFF
-
FREEZE KEYSTONE MUTE