Belling IH6013 Users Manual & Installation Handbook page 4

Induction Hob
• Parts of the appliance may become
hot while in use. Always make sure
that children are supervised when
they are near to the appliance.
• Always position pans over the centre
of the cook zone, and turn the han-
dles to a safe position so they cannot
be accidentally knocked or grabbed.
• Do not leave pans on the hob when
you're not around - take them off the
cook zone if you have to leave the
kitchen even if you think it will only
be for a moment, while you answer
the door or phone.
• If you use a griddle plate ensure it is
completely cool before attempting to
lift it from the hob as residual heat
may cause burns, Always use oven
gloves to protect your hands.
• The appliance has a glass hob top,
make sure you do not drag pans
across the ceramic surface as this will
lead to scratches and damage.
• Do not use the hob surface as a
chopping board or food preparation
area as this may lead to it becoming
damaged.
• Warning:- Do not use the hob if the
glass is cracked, as electrical parts
are directly beneath. To avoid the
possibility of electric shock, turn off
the electricity supply to the hob at
the socket and arrange a service call.
• The glass ceramic can get hot whilst
cooking; even though the cook zone
itself does not generate heat. The
heat generated is conducted back
from the hot pans.
• Keep electrical leads from trailing
over or going near the hob.
• Warning:- Metallic objects such as
knives, forks, spoons and lids should
not be placed on the hob surface
SAFETY
since they can get hot.
• Warning:- Ensure you switch off the
appropriate cook zone individually or
by the central on/off key when you
have finished cooking, do not rely
upon the automatic pan detection
system as your means of switching
"off" the appliance.
• The appliance must never be discon-
nected from the mains supply during
use as this will seriously affect the
safety and performance, particularly
in relation to surface temperatures
becoming hot and component parts
not working efficiently. The cooling
fan (if fitted) is designed to run on af-
ter the control has been switched off.
• This induction hob complies with the
applicable EMC and EMF standards.
Therefore it should not interfere with
other electronic units. Persons fitted
with a pacemaker or any other elec-
trical implant should clarify with their
doctor or the producer of the implant,
whether there implant is adequate
and fail-safe,
• the pacemaker must be designed
in compliance with the appropri-
ate regulations.