Anynet+ (HDMI-CEC) Device Menu
Once the TV has switched over to the selected device, you can access the device's menu using
the TV's remote control. Select the Virtual Remote panel's
Anynet+ device options may vary depending on the external device.
Select this to switch the remote control mode to the TV.
Displays a list of Anynet+ (HDMI-CEC) devices connected to the TV. To change a device, select a
desired device in the list.
Display the menu of the connected device. If the target device is a DVD player, the DVD menu is
Display a list of frequently-used functions that are available for the device. If the target device
is a DVD player, the DVD playback menu is shown. Some external devices may not support this
Display the connected device's title menu. If the target device is a DVD player, the DVD title menu
is shown. Some external devices may not support this option.
Listen to audio from the connected external device through an AV receiver, such as a home
theatre system, instead of the TV speakers. This option is only available when there is an AV
receiver connected to the TV. The menu may not be shown with receivers that support audio only.
from the list. The following Anynet+ device options will appear. The displayed
button to display the list. Select