Using The Anynet+ (Hdmi-Cec); Switching Between Anynet+ Devices; Anynet+ (Hdmi-Cec) Device Menu; Arc - Samsung SMART TV E-Manual

Using the Anynet+ (HDMI-CEC)

Users can operate external devices using just the TV remote control.

Switching between Anynet+ Devices

11
간편메뉴
Select the
list. A device selection screen will appear.
21
Select a device and wait for the switch to take place. This process may take up to 2 minutes to
complete and cannot be cancelled when started.
"
Alternatively, switch to a different Anynet+ (HDMI-CEC) device by selecting its name from the
However, Anynet+ (HDMI-CEC) cannot be used if a connected input connector is selected.

Anynet+ (HDMI-CEC) Device Menu

Once the TV has switched over to the selected device, you can access the device's menu using the
TV's remote control. Select the
CEC)
from the list. The following Anynet+ device options will appear. The displayed Anynet+ device
options may vary depending on the external device.
View TV: Select this to switch the remote control mode to the TV.
●
Device List: Displays a list of Anynet+ (HDMI-CEC) devices connected to the TV. To change a
●
device, select a desired device in the list.
(Connected Device) MENU: Display the menu of the connected device. If the target device is a
●
DVD player, the DVD menu is shown.
(Connected Device) Tools: Display a list of frequently-used functions that are available for the
●
device. If the target device is a DVD player, the DVD playback menu is shown. Some external
devices may not support this option.
●
(Connected Device)
a DVD player, the DVD title menu is shown. Some external devices may not support this option.
Receiver: Listen to audio from the connected external device through an AV receiver, such as a
●
home theater system, instead of the TV speakers. This option is only available when there is an
AV receiver connected to the TV. The menu may not be shown with receivers that support audio
only.

ARC

ARC enables digital sound to be output using just an HDMI cable. However, ARC is only available with
AV receivers that support ARC.
To use ARC, enable it from the Anynet+ (HDMI-CEC) device menu Receiver.
button on the virtual remote panel and then
간편메뉴
button on the virtual remote panel and then
Title Menu: Display the connected device's title menu. If the target device is
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-
from the
Source
list.