Download  Print this page

Using The Wps Button; Failed Wireless Connection - Samsung TV Manual

Tv samsung.
Hide thumbs

Advertisement

Using the WPS Button

If the router has a WPS push button, you can use it to connect the TV to the router automatically. WPS
automatically configures the SSID and WPA key settings.
11
Network Type
Setting
21
WPS(PBC)
Select
31
The TV automatically acquires the SSID and security key settings and connects to the network. A
confirmation message is then shown once a connection is established. Select

Failed Wireless Connection

Wireless network connection failed, or no wireless router selected.
Network Settings
Go to
Unable to connect to a wireless router
Check the following:
11
Check that the router is turned on, and if it is, turn it off and on again.
21
Enter the correct security key if required.
IP auto setting failed
Perform the following or set the IP address manually from
11
Make sure that the DHCP server is enabled on the router and unplug and plug the router back in.
21
Enter the correct security key if required.
31
If this does not work, contact your Internet Service Provider for more information.
Wireless
to
automatically displays a list of available wireless networks.
and then press the router's WPS button within two minutes.
and select the correct router.
Try Now
Try Now Try Now
IP
Settings.
OK
to proceed.
Try Now Try Now

Advertisement

Table of Contents

   Also See for Samsung TV

   Related Manuals for Samsung TV

This manual is also suitable for:

7000 series8000 series

Comments to this Manuals

Symbols: 0
Latest comments: