Chefman My Barista RJ30 SERIES User Manual page 12

Operating Instructions (cont'd)
STOPPING THE BREW PROCESS
If you need to stop the brewing after the process has started, press and release the
Power Button to turn the Brewer "OFF", or press and release either Brew Button to
stop the brewing. The flow of coffee, tea or hot cocoa will stop; the heating element
will shut off.
ADDING WATER
When the Power and Brew Buttons begin to flash simultaneously this indicates
the water level in the tank is low or the Water Tank is not securely in place. The
Brewer will not allow you to brew when the Power and Brew Buttons are flashing
simultaneously.
The Water Tank can be filled in two ways.
1. Lift up the Water Tank Lid and pour water directly into the Water Tank while it is
still attached to the Brewer, then close the Lid.
2. Remove the Water Tank from Brewer by firmly grabbing the tank, then lifting the
Water Tank straight up. Fill with water. Place the Water Tank back on the Brewer
and close the Water Tank Lid.
IMPORTANT: Do not remove the Water Tank during the brewing process.
BREWING ICED BEVERAGES
Your iced tea and iced coffee taste best when fresh-brewed hot over ice. Try it by
placing a tall cup filled with ice on the Drip Tray, select the brew size and press the
Brew Button. Also, look for specially marked portion packs that are specially crafted
to brew over ice!
IMPORTANT: Do not brew into a cup made of glass. Doing so may cause the glass
to crack or break.
TURNING OFF YOUR BREWER
The Brewer is programmed to automatically power itself off after 5 minutes of
inactivity. To turn your Brewer off manually simply press and release the Power
Button.
AFTER SALES SUPPORT
9
888-315-8407 customerwarranty@rjbrands.com
USA
MODEL: RJ30 SERIES