Chapter1 Safety Notice - D-Link DVX-2004 User Manual

Please read the following safety notices before installing or using this IP PBX. They are
crucial for a safe and reliable operation of the device.
 Please use the external power supply which is included in the package. Other power
supplies may cause damage to the device, affect the performance or induce noise.

Before using the external power supply in the package, please check with residential
power voltage. Inaccurate power voltage may cause fire and damage.

Please do not damage the power cord. If power cord or plug is impaired, do not use it,
otherwise, it may cause fire or electric shock.

The plug-socket combination must be accessible at all times because it serves as the
main disconnecting device.

Do not drop, knock or shake it. Rough handling can break internal circuit boards.

Do not install the device in places where there is direct sunlight. Also do not place the
device on carpets or cushions. It may cause fire or breakdown.

Avoid exposing the device to high temperature, below -10°C or high humidity. Avoid
wetting the unit with any liquid.

Do not attempt to open it. Non-expert handling to the device could damage it. Consult
your authorized dealer for help, or else it may cause fire, electric shock or breakdown.

Do not use harsh chemicals, cleaning solvents, or strong detergents to clean it. Wipe
it with soft cloth that has been slightly dampened in a mild soap and water solution.
 When lightning, do not touch power plug or phone line, it may cause an electric
shock.

Do not install this device in an ill-ventilated place.
 You are in a situation that could cause bodily injury. Before you work on any
equipment, be aware of the hazard involved with electrical circuitry and be familiar
with standard practices for preventing accidents.

Chapter1 Safety Notice

3