D-Link DVX-2004 User Manual page 41

Attended Transfer
Disconnect Call
Timeout for answer on
attended transfer
Blacklist a number
Remove a number from
the black list
Invite Participant
Create Conference
Return to conference
with participant
Return to conference
without participant
Agent Login Extension
on a conversation with A, you dial the blind transfer key
sequence. The system says "Transfer" then gives you a dial
tone, while A is on hold. You dial the transferee number(B's
number) and A is put through to B immediately. Your line is
off. The caller ID displayed to B is exactly the same as the
caller ID presented to you.
Allow attended transfer or supervised transfer. It works like
this: While on conversation with A, you dial the Attended
Transfer key sequence. The system says "Transfer" then
gives you a dial tone, while A is on hold. You dial the
transferee number(B's number) and talk with B to introduce
the call, then you can hang up and A will be connected with
the B. In case B does not want to answer the call, he/she
simply hangs up and you will be back to your original
conversation.
Disconnect the current transfer call(for Attended transfer).
Set the answer timeout value.
Add a black list number.
Remove a black list number.
The administrator can invite another person by pressing 0
when he/she is in the conference. When you press 0, you will
get a dialtone to enter the number of part A you also would
like to invite. After the call has been established and you talk
to B, you can press ** to direct him to the conference, or *# to
hang up the current call and return to the conference
yourself.
While you speak with another party you can press *0, you
and the callee are immediately transferred to conference.
The administrator can invite another person by pressing 0
when he/she is in the conference. When you press 0, you will
get a dialtone to enter the number of part A you also would
like to invite. After the call has been established and you talk
to B, you can press ** to direct him to the conference, or *# to
hang up the current call and return to the conference yourself
The administrator can invite another person by pressing 0
when he/she is in the conference. When you press 0, you will
get a dialtone to enter the number of part A you also would
like to invite. After the call has been established and you talk
to B, you can press ** to direct him to the conference, or *# to
hang up the current call and return to the conference
yourself.
Logs the current caller into the queue as a call agent. Once
logged in, the agent can take calls with the phone off-hook;
40