Outbound Routes - D-Link DVX-2004 User Manual

Item
Peer Name
Protocol
Dial Plan
Host
NAT
Without
Authentication
Username
Password
Once A trunk is added, this trunk will be displayed in the "List of Trunk". You can define the
codecs, configure advanced settings or delete this trunk from the drop downs of "Option"

3.3.4 Outbound Routes

Outbound Routes is to define what trunk is used for outbound call by extension user. If
you don't allow extension user call out, please ignore this part.
Please configure on this page: 【Basic】->【Outbound Routes】
Define the Peer Name, digit or letter is allowed.
Choose protocol for this trunk, SIP or IAX2
Choose a dial plan for this trunk, define it in the submenu named
【Outbound Routes】.
IP Address of the other DVX-2004 IP PBX
Check this option, extension user will be configured after NAT
(Network Address Translation).
If you don't use Authentication when connecting server, pls check
this option.
Username provided by the other DVX-2004 IP PBX.
Password provided by the other DVX-2004 IP PBX.
14
Explanation