Unpacking Your Genesis Platinum - Genesis Platinum Alkaline Water Ionizer User Manual

Unpacking Your Genesis Platinum

Water On/Off Button
Switches the product from production mode to off/standby mode. Touch this sensor to
start producing water. The product will automatically start producing water at the selected
alkaline level. At startup the product may enter into a self cleaning cycle. Let this cycle
run its course before using any of the water produced during cleaning. Discard this water.
*When the power switch is first turned on, the product is designed to perform an
automatic cleaning for 30 seconds. In cleaning state, the acid water flows out of the
alkaline water exit while the alkaline water drains out of the acid water exit.
Unpacking Your Genesis Platinum:
Note: You view installation videos at the Water for Life USA website,
www.waterforlifeusa.com, and click on resources.
If you still find you have questions please contact your Dealer and for those of you that
purchased direct from Water for Life USA please call our toll free number 877-255-3713
for assistance.
Inside the Genesis Platinum Box
- Genesis/Genesis Platinum
- Hardware box containing installation parts and accessories
- GenesisGenesis Platinum user's manual
- Water for Life USA product literature (varies)
- Informational DVD (Not currently included) Available on the website and You Tube,
just search for account "waterforlifeusavideo"
- 6 feet of 1/4" white water tubing- to be cut to length during installation for in water and
out drain.
Alkaline Water Ionizer
GENESIS Platinum
Installation Instructions
Let's get started!
1) Please examine your delivery to insure your new Genesis Platinum has not been
damaged during shipping. Please contact your dealer or Water for Life USA
immediately if damage has occured.
2) Remove your Genesis Platinum, lay it on its back and remove the clear cover
(sealed at the bottom of your machine)
3) Open the hardware box where you will find your flexible stainless steel hose, two
diverter valves (faucet and cold water line), power cord, 1/4 line suction cup for the
out line, pressure reducer valve for high water pressure areas (usually cities), and pH
drops for testing your water after installation has been completed. Please refer to the
color chart on the bottle when you are testing your alkaline/purified/acidic water.
4) Decide which method of installation you will use (faucet or cold water line) and
return any unused hardware to the hardware box so it does not get misplaced.
Installing Your Genesis Platinum
Alkaline Water Ionizer
GENESIS Platinum