Reverb Settings; Startup Settings - Johannus Opus 250 User Manual

7. Press the MENU piston 2x to exit the Johannus Menu.

5.10 Reverb Settings

The Opus 250 is equipped with the Adaptive Surround Reverb ASR-12 system. With this system
it is possible to choose a matching reverb for each intonation style and variation. The length of
the reverb can be changed and a 3D Surround effect can be enabled.
1. Use the intonation style and variation pistons to
activate an intonation style or variation the
reverberation of which has to be changed.
2. Press the MENU piston.
Use the - and + pistons to select the Reverb
3.
Settings function on the display.
4. Press the ENTER piston. The first function of the Reverb
Settings appears on the display.
5. Use the - and + pistons to select the desired reverb
function which has to be changed. The following
functions are available: Reverb Program, Reverb
Length and Reverb 3D Surround.
6. Press the ENTER piston to confirm.
The activated intonation style or variation appears on
the first line of the display. The setting of the selected
reverb function appears on the second line of the
display.
7. Use the - and + pistons to change the setting of the
selected reverb function.
8. Press the ENTER piston to confirm and to return to the
Reverb Settings menu.
9. Press the MENU piston 2x to exit the Johannus Menu.

5.11 Startup Settings

The Startup Settings can be used to select the startup defaults for the following functions:
a. Chorus On/Off
b. Default Intonation
c. Side Speakers volume
User Manual Opus 250/350
Opus 250 Mem: 1
Tr: 0/440 Cr:--
Johannus Menu:
Crescendo
Johannus Menu:
Reverb Settings
Reverb Settings
Reverb Program
Reverb Settings
Rev. 3D Surround
Romantic
3D Surround: On
Reverb Settings
Rev. 3D Surround
Opus 250 Mem: 1
Tr: 0/440 Cr:--
28