2.1.2
Installation music desk
1.
Turn countersunk brass screws (A) into music desk slat (B) by hand till screws
stick out 2 mm (C).
2.
Place music desk at the right position, with screw points into the pre-drilled
holes (D).
3.
Tight music desk with screw driver. The use of an electric screw driver is not
recommended.
2.2
Switch on
Switch on the organ with the on/off piston at
the right, next to the manuals. Wait several
seconds. Starting the control functions and the
settings will take some time.
The lamps of the 0 piston and the as standard
set functions light up. The settings appear on
the display.
User Manual Opus 250/350
Initializing...
Please wait
Opus 250
Mem: 1
Tr: 0/440
Cr:--
7