Optional Features; External Rewinder; Cutter Assembly - CAB A8 Operator's Manual

Control panel :
Dimensions (HxWxD):
Weight :
Operating voltage :
Maximum
power input :
Circuit protection :
Environment :

Optional Features

External Rewinder

For rewinding large print jobs, an external rewinder is available to handle an
entire label roll. Please note, that for an external rewinder, the maximum size of
the supply roll is limited to 8 in (200 mm) with a core diameter of 3 in (76 mm).
The power supply of the external rewinder will be realized by an integrated
power pack. It is independent on the printer.

Cutter Assembly

With the optional cutter unit, labels or continuous media (up to 180 g/sqm) may
be cut immediately after printing. You can choose whenever you want to cut,
whether you cut off the individually, after a pre-selected quantity of labels have
been printed, or only at the end of a print job.
The cutter is powered and controlled directly by the peripheral connector of the
A8.
For cutter operation, the firmware of the A8 will automatically backfeed the
label, so that after cutting, the label roll will be repositioned for the print of the
next label.
14
4 Function keys with LED display
lighting up graphic LCD display
LCD can be set to display in 8 different languages
15.8 x 14.8 x 18.3 in (402 x 377 x 465 mm)
59.5 lb. (27 kg)
Switchable between 230 V A.C / 50 Hz or 115 V A.C / 60 Hz
1.5 A (at 230 V) / 3 A (at 115 V)
T 4 A (at 230 V) / T 6,3 A (at 115 V)
Operation at 50° to 95° F (10 to 35°C) at a humidity of 30 to 85%
Transport at -13° to 158° F (-25 to +70°C) at a max. humidity of 95%
non-condensing
Storage at 41° to 104° F (5 to 40 °C) at a humidity of 5 to 85%
cab Produkttechnik GmbH & Co KG / Tharo Systems, Inc.