Advertisement
9. Fitting a plinth facia
This step is not carried out for dish-
washers installed in a kitchen with a
continuous kitchen plinth facia.
In that case align the plinth facia as de-
scribed for the integrated 'i' dish-
washers in the Operating Instructions
booklet.
The height of the plinth facia supplied
is set for:
– A maximum plinth rebate of 100 mm.
– A maximum building-in height of the
machine, with the feet fully (5 cm) ex-
tended.
If these measurements are less than
the maximum, the door may hit the
plinth facia. If it does, trim the height of
the plinth facia accordingly.
On each side push the spring clips
aside and push the brackets right in.
G 6XX type dishwasher:
(See data plate for machine type)
The brackets point inwards.
G 8XX type dishwasher:
(See data plate for machine type)
The brackets point outwards.
Q
15
Advertisement
