Using The Led Illuminator - Leica ES2 Manual

Using the LED illuminator

Iluminating the specimen
1. Position a specimen in the middle of the
baseplate.
2. Switch the two LED illuminators on or off as
desired.
After switching off, the LEDs remain lit for
about another 4 seconds.
Leica E Series
Tips on use
Use incident light for plastic, opaque
Ϙ
objects.
Use transmitted light for transmitted light
Ϙ
specimens or transparent objects.
Use the combination of both LED illumina-
Ϙ
tors for partially transparent objects.
Manual 14