Evc Control Panel - Volvo Penta D12 Operator's Manual

EVC control panel

The control panel is used in combination with the EVC system tachometer. The tachometer display shows oper-
ating information and menus that can be navigated from the control panel.
Activation button
Used to activate and lock the control panel and helm-
station.
Indication (red):
Off: Control panel not activated.
Lit: Control panel activated.
Flashes: Control panel not activated due to the con-
trol lever not being in neutral or the system has been
locked from another control panel.
Padlock
The padlock symbol lights if the control panel is
locked manually by depressing the
exchange has been activated by routine "Change of
control panel during journey".
Lit: The system is locked and the engine can only be
controlled from the activated control panel.
Neutral button
Used to disengage the drive so that the engine speed
can be increased without driving (warming up).
Indication (green):
Off: Drive engaged.
Lit: Control lever in neutral position.
Flashes: Drive disengaged or system in calibration
mode.
Navigation wheel
Used to navigate through the menus shown on the
tachometer EVC system display. Navigate through
the menus by turning the wheel. Depress the wheel
to confirm a selection.
tion, port or starboard tachometer)
Is used to select which of the engines menu systems
should be navigable from the control panel. The
menu is shown on the display of the corresponding
engines tachometer. Select port or starboard.
Indication (red/green):
Off: Not possible to navigate in menu.
Lit: Possible to navigate in menu for selected en-
gine, port (red), starboard (green).
Used to increase or decrease the instrument's and
-button, or if
panel's backlighting.
Depress the button for at least 1 second to turn the
backlighting on or off. The backlighting can be adjust-
ed in five stages by pressing the multifunction button.
If the button is pressed on a inactive control panel,
operating information is shown on the display(s) and
it is possible to navigate in the menus.
Used to back a step in the menu.
Tachometer display selection (twin installa-
Multifunction button
Back button
IMPORTANT! Always press the buttons firmly,
and for at least one second each time.
Instruments
17