Identification Number - Volvo Penta D12 Operator's Manual

Introduction
Identification numbers
There are type plates on the engine and transmission, marked with identification numbers. This information must
always be used a reference when service and spare parts are ordered. You will probably find similar plates on
your boat and its equipment. Note this information below, make a copy of the page and store it in a safe place,
so that you can have the information available if the boat is stolen.
The appearance and location of the type plates is shown below. The figures in brackets refer to the location of
the identification number on the type plate.
Engine
Product designation (1)
Serial and base engine number () .................................................................................
Product number (3) ..........................................................................................................
Control unit
"Dataset" (parameter file) (4) ...........................................................................................
Main software (5) .............................................................................................................
Certification, IMO
Reverse gear
Product designation (6) ..................................................................................................
Serial number (7) .............................................................................................................
Product number (8) ..........................................................................................................
THIS ENGINE TYPE IS CERTIFIED
ACC. TO IMO NOx TECHNICAL
CODE ANNEX VI
Certification decal
D12D-C MH
RATED POWER: xxx kW
RATED SPEED: xxxx RPM
MSW: xxxxxxx
DST 1: xxxxxxxx
DST : xxxxxxxx
SPEC. NO: xxxxxx
Decal, control unit
10
D12D-C MH
(5)
(4)
(4)
(3)
Warranty decal
6, 7, 8
Reverse gear plate
Engine plate