Software
Cleaning program
Touch the
Cleaning prog.
The daily cleaning program starts.
The program automatically executes foamer cleaning if
milk beverages have been dispensed. Mixer rinsing follows
for the WMF prestolino! with mixer system.
The cleaning program sequence is described in cleaning
instruction.
Prior to carrying out cleaning, please note the safety
instructions in the safety chapter. Read the cleaning
instruction and the Care chapter, starting on page 37.
Foamer cleaning
Touch the
FoamerCleaning
Milk foamer cleaning begins.
Optional Plug&Clean cleaning.
Foamer cleaning is carried out automatically as an
integral part of the full cleaning mode.
Mixer rinsing
Touch the
Mixer Rinsing
Mixer rinsing begins.
Mixer rinsing is performed automatically by the cleaning
program when a mixer system is installed.
24
pad
pad
pad
Cleaning prog.
Follow the manual.
Observe the Safety chapter.
FoamerCleaning
Plug&Clean cleaning
Care
page 39
Hot liquids in the
dispensing area.
Observe the Safety chapter.
Mixer Rinsing
Hot liquids in the
dispensing area.
Observe the Safety chapter.
User Manual WMF prestolino!