Download Print this page
Marley DH1021C Installation & Maintenance Instructions

Marley DH1021C Installation & Maintenance Instructions

Dh series portable industrial unit blower air heaters

Advertisement

Quick Links

DH Series
Portable Industrial Unit
Blower Air Heaters
Installation & Maintenance Instructions
Dear Owner,
Congratulations! Thank you for purchasing this new heater by Marley Engineered Products. You have made a wise invest-
ment selecting the highest quality product in the heating industry. Please carefully read the installation and maintenance
instructions shown in this manual. You should enjoy years of efficient heating comfort with this product from Marley
Engineered Products... the industry's leader in design, manufacturing, quality and service.
When using electrical appliances, basic precautions should
always be followed to reduce the risk of fire, electric shock
and injury to persons, including the following:
1. Read all instructions before using this heater.
2. This heater is hot when in use. To avoid burns, do not let
bare skin touch hot surfaces. If provided, use handles
when moving this heater. Keep combustible materials,
such as furniture, pillows, bedding, papers, clothes, and
curtains at least 3 feet (0.9 m) from the front of the heater
and keep them away from the sides and rear.
3. Extreme caution is necessary when any heater is used by
or near children or handicapped individuals and whenev-
er the heater is left operating and unattended.
4. Always disconnect heater when not in use.
5. Do not operate any heater with a damaged cord or plug
or after the heater malfunctions, has been dropped or
damaged in any manner. Return heater to authorized ser-
vice facility for examination, electrical or mechanical
adjustments, or repair.
6. Do not use outdoors.
7. This heater is not intended for use in bathrooms, laundry
areas and similar indoor locations. Never locate heater
where it may fall into a bathtub or other water container.
WARNING

SAVE THESE INSTRUCTIONS

... The Employees of Marley Engineered Products
!
8. Do not run cord under carpeting. Do not cover cord with
throw rugs, runners or the like. Arrange cord away from
traffic area and where it will not be tripped over.
9. To disconnect heater, turn thermostat off, then remove
plug from outlet.
10. Connect to properly grounded outlets only.
11. Do not insert or allow foreign objects to enter any ventila-
tion or exhaust opening as this may cause an electric
shock, fire or damage the heater.
12. To prevent a possible fire, do not block air intakes or
exhaust in any manner. Do not use on soft surfaces, like
a bed, where opening may become blocked.
13. A heater has hot and arcing or sparking parts inside.Do
not use it in areas where gasoline, paint or flammable liq-
uids are used or stored.
14. Use this heater only as described in this manual. Any
other use not recommended by the manufacturer may
cause fire, electric shock or injury to persons.
15. This heater is not intended for use with an extension cord.
16. Save these instructions.

Advertisement

loading
Need help?

Need help?

Do you have a question about the DH1021C and is the answer not in the manual?

Questions and answers

Summary of Contents for Marley DH1021C

  • Page 1: Save These Instructions

    Installation & Maintenance Instructions Dear Owner, Congratulations! Thank you for purchasing this new heater by Marley Engineered Products. You have made a wise invest- ment selecting the highest quality product in the heating industry. Please carefully read the installation and maintenance instructions shown in this manual.
  • Page 2: Assembly Instructions

    29.1 75 lbs CS25084 LPS25084 *Model DH1021C is shipped with 10 ft. power cord and plug. Note: All units are factory wired for 3 phase operation. Models designated 1 and 3 phase can be field wired for single phase operation.
  • Page 3 Cord Preparation for Portable Heaters Diag. 1 – FACTORY WIRED 3 PHASE 1. Determine the gage and number of conductors fromChart A using Cord by others. amps and phase from the heater nameplate. It is not recommended Type "SO" or equal sized to meet nameplate that cord exceed 50 feet in length.
  • Page 4: Limited Warranty

    Marley Engineered Products Service Center. Within the limitations of this warranty, inoperative units should be returned to the nearest Marley authorized service center or the Marley Engineered Products Service Center, and we will repair or replace, at our option, at no charge to you with return freight paid by Marley. It is agreed that such repair or replacement is the exclusive remedy available from Marley Engineered Products.

This manual is also suitable for:

Dh0783Dh1023Dh1583Dh1523Dh1521Dh1543 ... Show all