Installing The Milk Island - Gaggia Platinum swing up Operation And Maintenance Manual

INSTALLATION
14

INSTALLING THE MILK ISLAND

Warning: Before installing the Milk Island, remove the water tank, drip tray, dregs drawer and
empty the coffee bean hopper of the espresso machine. To connect the Milk Island, place the
machine on its side. Turn the coffee machine off and unplug the power cord from the socket.
1
Remove the Milk Island from
the packaging. Make sure that
the jug is in tact.
4
Push the release button in the
direction indicated.
7
Once the support base has been
inserted properly, re-position the
coffee machine to it's correct position
and replace all of the removed
containers/machine pieces.
2
After removing the necessary items
from the machine, gently turn the
machine onto its right side, so the
left side is up. Remove the protection
cover. Using a coin, unlock the cover
by turning it as shown in the fi gure.
5
Hold the release button and
connect the Milk Island to the
coffee machine by inserting both
connectors into the base of the
coffee machine.
8
Milk Island is automatically
confi gured when the coffee
machine is turned on.
3
Remove the cover and keep it
in a safe place.
6
Release the button when the
base has been completely
inserted.
Ensure that the base is fi rmly
connected to the machine.
9
Position the jug onto the base
by slightly rotating. Check the
LED on the base, if the light is
green the Milk Island is operating
correctly.