Connecting The Power Supply Cables - Honeywell X-618 Installation Manual

Figure 22 Schematic Diagram of Connecting the DCS to the NPM
Connecting the DCS to the NPM through a Network Switch
Connect the DCS to the NPM through a network switch. The DCS and network switch must be on
the same network. Refer to Figure 23.
Figure 23 Schematic Diagram of Connecting the DCS to the NPM Through a Network Switch

Connecting the Power Supply Cables

The power supply cables for the main X-618 system components include the following items:

DCS Main and Standby Power Supply Cables

DA Main and Standby Power Supply Cables

NPM Power Supply Cable
17