D-Link SecuriCam DCS-5300W Manual page 72

Using IP surveillance Software (continued)
Alert Message
If you turn on the Alert function, and a trigger is set off by motion, an alert
message will show in this window. The message format is described as follows:
"time"=>"alert type" #"channel number"("win1","win2","win3")
For example, the message "03:47:25 PM=>MO #5(0,1,1)" means that a motion
detection alert occurred at 03:47:25 PM in motion window 2 and in motion
window 3.
Backup
The Backup function archives recorded data based on the location and size
you previously selected in Global Settings. You can duplicate the backup data
to a removable device such as CD-ROM, ZIP disk, DVD-RAM or tape manually.
After the backup starts, you cannot configure the camera or change any settings.
You can cancel the backup process by selecting the Cancel Backup option.
After the backup completes, a message appears informing you the backup is
complete.
72