D-Link SecuriCam DCS-5300W Manual page 64

Using IP surveillance Software (continued)
Changing the Camera Order in the List
You can drag and drop the gray area (fixed area) of the camera list grid to
change the arrangement of cameras. This makes it easy to rearrange the cameras.
Left-click in the
gray area.
Move the mouse to the
location you want and
release the
mouse button. Here video
1 will be moved to the
10th row.
Motion Window and Alert Settings
Show Window Options –
DCS-5300W camera, each motion window can be turned on in Show Window
Options. Once the motion window is turned on, it will be shown as a green
rectangle in monitoring screen. If you just want to see the motion window when
alerted, you can also turn on the alert window separately. The alert window will
be shown in red rectangle when an alert occurs.
Alert Settings –
an alert sound or starting recording when motion is detected or a digital input is
triggered. The digital input can be high-triggered or low-triggered. It depends on
your setting. You can also specify the period to record after the alert-trigger.
If Motion Detection is enabled for the selected
Some special actions can be performed, such as generating
64