D-Link SecuriCam DCS-5300W Manual page 61

Using IP surveillance Software (continued)
Recording settings
You can record video onto your hard disk. The recording
schedule is configured in the Scheduler.
Hard disk status
In this area, you can get the hard disk status. This informs you
of the available disk space remaining.
P/T control
Controls used to pan and tilt the camera.
DI/DO control
Receive the digital input signal and send digital output signal.
Alert Message
Display the last alert messages.
Logging In
You need to login to use the IP surveillance software system. There are two
privileges in the account-password system: the admin (administrator) and the
general user.
Click
If you have administrator privileges, you have the right to do the following:
Run the configuration tool
Change the recording schedule
Change the local settings
General users can only monitor the surveillance videos and change the layout
of the Monitor program, but they do not have the right to change any
configuration settings including recording schedules and local settings.
OK
61