D-Link SecuriCam DCS-5300W Manual page 55

Using the DCS-5300W with an Internet
browser (continued)
Configuration > Tools > Applications (Continued)
FTP put snapshots with
date and time suffix -
Click Apply to make
changes effective
Configuration > Tools > Default
Click on the Default button to access the factory Default settings from the
Tools menu.
Click
Click Apply under Restore Factory Default to restore the factory default
settings. This means any changes made will be lost and the system will be
reset to the initial status when shipped from the factory. After confirmation, the
system will restart and require the IP Installer software program to setup the
DCS-5300W.
Click Apply under Calibrate to restore the factory default settings. This means
that the camera will be recalibrated to the default center to recoverthe tolerance
caused by some external forces.
If the suffix is added, the captured date and time
can be easily differentiated from the snapshot file
name in either sequential or event operation. For
instance, "video@20020102030405.jpg" means
the JPEG image was captured at 4 minutes and
5 seconds after 3 o'clock, January 2nd, A.D. 2002.
If the suffix is omitted, the file named "video.jpg"
on the external FTP server will be refreshed at
the specified interval.
Default
55