Names Of Parts And Their Functions - JVC TD-W354 Instructions Manual

NAMES OF PARTS AND THEIR FUNCTIONS

2 1 1
TD-W354 DOUBLE CASSETTE DECK
AUTO REVERSE
A
PLAYBACK PITCH CONTROL
COMPULINK
Component
POWER
ON OFF
STANDBY / ON
(B version) (J version)
1
POWER switch (
POWER switch (On/Standby) (J version)
2
switch (STANDBY/ON) (B version)
3 Cassette holder (deck A)
4 Cassette operation buttons (deck A)
: Press to wind the tape quickly from right to left.
: Press to wind the tape quickly from left to right.
PLAY : Press to play the tape.
(stop) : Press to stop the tape.
: Press to change the direction of tape travel.
(direction)
5
(eject) button (deck A)
6 Power STANDBY indicator
Lights when in the power standby mode.
7 COUNTER RESET button (deck A)
Press this button to set the digital counter to ''00 00''.
Even if the (STANDBY/ON) or POWER switch is set to
STANDBY, the counter value at that time is stored in
memory.
8 Indicators
1 DDRP indicator
2 Peak level indicator
These indicators light according to the level of the signal
being recorded or the level of the signal recorded on the
tape.
Note:
0 dB : IEC (DIN) STANDARD LEVEL (250 nWb/m)
0 VU : Signal level at 160 nWb/m
3 HX PRO indicator
4 Digital counter
The counter reading increases while the tape is running
from left to right and decreases when it is running from
right to left. In the Multi Music Scan mode when the
(or ) button is pressed, the number of tunes
which will be skipped is displayed.
5 Mechanism mode indicators (deck A)
: This lights when rewinding the tape
: This lights when rewinding the tape
PLAY : This lights when in the playback.
, : Indicates the direction of tape travel.
3
TD-W354 DOUBLE CASSETTE DECK
STANDBY
COUNTER RESET
3 3
A AUTO REVERSE
2 2
PITCH CONTROL
PLAYBACK
MUSIC SCAN
1 1
COMPULINK
PLAY
Component
MIN MIN
PHONES
POWER
ON OFF) (B version)
from left to right.
from right to left.
4 5 6 7
STANDBY
INPUT LEVEL INPUT LEVEL
INPUT LEVEL INPUT LEVEL
5 5
5 5
COUNTER RESET
4 4
COMPU CAL COUNTER RESET
4 4 6 6
3 3
7
2 2
8
MUSIC SCAN
MUSIC SCAN
1 1
9
PLAY PLAY
MIN MIN
MAX MAX
PITCH CONTROL
PHONES
MIX LEVEL MIC
PITCH CONTROL
REC/REC MUTE PAUSE
SLOW
SLOW FAST
MIN MAX
DECK A
DECK A
e r t
6 Dubbing mode indicators
''DUBBING >''
''DUBBING >>''
7 CONT
8 Mechanism mode indicators (deck B)
PLAY
REC
9
9 COMPU CAL button and indicator
Press this button to automatically set the recording charac-
teristics with the COMPU CAL function. (See page 9.)
0 COUNTER RESET button (deck B)
q
(eject) button (deck B)
w Cassette holder (deck B)
e PHONES jack
Connects headphones (with an impedance of 8
r INPUT LEVEL control
t PITCH CONTROL (deck A)
Varies the tape speed in deck A in the range of about ±10%.
However, it cannot change the tape speed in the high-speed
dubbing.
Turning it counterclockwise toward ''SLOW'' causes the tape
speed to decrease while turning clockwise toward ''FAST''
causes it to increase. The center click position is for the
standard speed. (See page 8.)
y Mixing microphone level control
Adjusts the microphone input level.
u MIX MIC jack
Connects a microphone (with an impedance of 600
10 k ) to this jack.
Sounds from the microphone are monaural.
– 6 –
9
8 0 q
DOLBY B-C NR HX PRO
COMPU CAL COUNTER RESET
6 6
7
COMPU CALIBRATION
B
8
AUTO REVERSE
REC/PLAYBACK
MUSIC SCAN
9
PLAY
MAX MAX
MIX LEVEL MIC
REC/REC MUTE PAUSE
DOLBY NR REVERSE A B SYNCHRO DUBBING
MODE
B C NORM SPEED HIGH SPEED
FAST MIN
MAX
y u
: Lights when in the normal-speed dub-
bing mode.
: Lights when in the high-speed dub-
bing mode.
: Lights when the unit is in the continu-
ous play mode.
: Lights when the unit is in the playback
and record modes.
, : Indicates the direction of tape travel.
: Lights when the unit is in the record
and record-pause modes; blinks dur-
ing record muting.
: Pause indicator
: This lights when rewinding the tape
from left to right.
: This lights when rewinding the tape
from right to left.
: Indicates reverse mode.
w
DOLBY B-C NR HX PRO
COMPU CALIBRATION
B
AUTO REVERSE
REC/PLAYBACK
DOLBY NR REVERSE A B SYNCHRO DUBBING
MODE
B C NORM SPEED HIGH SPEED
i o p a
to 1 k ).
to