Advertisement
Quick Links
READ AND SAVE THESE INSTRUCTIONS
TESTED IN ACCORDANCE WITH THE LATEST EDITION OF ANSI/UL507, STANDARD FOR ELECTRIC FANS, AND
CSA C22.2 NO. 113, STANDARD FOR FANS AND VENTILATORS.
CONVENTIONS USED IN THESE INSTRUCTIONS
WARNINGS:
Must be followed carefully to avoid personal injury or damage.
NOTES:
Contain helpful hints and tips to facilitate the installation.
IMPORTANT
1.
Before beginning installation, please thoroughly read and become familiar with these instructions.
2.
Installation and service must be completed by a qualified installer or service agency.
3.
Installer: Please leave these Installation Instructions with the owner.
4.
Owner: Please keep these instructions for local electrical inspector's use and for future reference.
5.
Read the accompanying Use & Care Manual prior to operating this appliance.
TABLE OF STEPS
Installation Planning
Electrical Connection
Installing the ILB
Installing the REMP
Verifying Proper Operation
Part No. 65265 Rev. D
Installation Instructions
Remote Blowers
Pages 2-3
Pages 3-5
Page 6
Page 6
Page 6
Advertisement
Related Manuals for Dacor ILB8
Summary of Contents for Dacor ILB8
- Page 1 Installation Instructions Remote Blowers READ AND SAVE THESE INSTRUCTIONS TESTED IN ACCORDANCE WITH THE LATEST EDITION OF ANSI/UL507, STANDARD FOR ELECTRIC FANS, AND CSA C22.2 NO. 113, STANDARD FOR FANS AND VENTILATORS. CONVENTIONS USED IN THESE INSTRUCTIONS WARNINGS: Must be followed carefully to avoid personal injury or damage. NOTES: Contain helpful hints and tips to facilitate the installation.
-
Page 2: To Reduce The Risk Of Fire, Electric Shock, Or Injury To Persons, Observe The Following
IMPORTANT SAFETY INSTRUCTIONS WARNING: WARNING: CAUTION: TO REDUCE THE RISK OF FIRE, TO REDUCE THE RISK OF FIRE, For General Ventilating Use Only. ELECTRIC SHOCK, OR INJURY USE ONLY METAL DUCTWORK. Do Not Use To Exhaust Hazardous TO PERSONS, OBSERVE THE Or Explosive Materials And FOLLOWING: WARNING:... -
Page 3: Installation Planning
Duct Diameter A qualified technician must complete the Width “A” Height “B” Length “C” “D” installation of this appliance. ILB8 10 5/8” (270mm) 10 1/2” (267mm) 8” (203mm) 5” (127mm) Carefully check the location where the remote ILB10 12 5/8” (321mm) 12 1/2”... -
Page 4: Electrical Connection
NOTE: The ILB8 & ILB10 inline blowers are only approved in updraft REMP (hood) applications. Discharge NOTE: The REMP must be sealed 45° Adjustable Elbow between the roof or wall and the underside of the flange with 3 1/4" x 10" to Round mastic to prevent leaks. - Page 5 REMP 120VAC, 60Hz, 15A Supply power from J-BOX dedicated circuit breaker CABP3 Wiring of RV with REMP and CABP3 120VAC, 60Hz, 15A Supply power from dedicated circuit breaker REMP OR CABP3 Wiring of RV with REMP or CABP3 ERV/PRV 120VAC, 60Hz, 15A Supply power from dedicated circuit breaker REMP...
- Page 6 Supply power from dedicated circuit breaker Wiring of DACOR Hood with ILB REMP Wiring of DACOR Hood with REMP REMOTE BLOWER/ HOOD 120VAC, 60Hz, 15A Supply power from dedicated circuit breaker J-BOX REMP Wiring of DACOR Remote Blower/Hood with ILB and REMP...
- Page 7 If the appliance still does not work, contact an authorized DACOR service company. If you are unable to locate a DACOR Servicer, please contact DACOR at (800) 793-0093, or visit us on the web at www.dacor.com. Do not attempt to repair the appliance yourself.
- Page 8 Web Site: www.dacor.com For a Dealer/Service: (800) 772-7778 Corporate Phone: (800) 793-0093...