Dacor CABP3 Planning Manual

Document # PG09-001
Total Connected
Load
4 Amps. @
120Vac, 60 Hz
* At zero inches static pressure
NOTE: The CABP3 cabinet blower is approved
only for use with Dacor RV series raised vents.
19 3/8" 18 7/8"
(492 mm) (479 mm)
3/8" (9 mm)
mounting flange
around perimeter
www.Dacor.com
Phone: (800) 793-0093
Cabinet Blower
Blower Rating* Approximate
(CFM) Shipping Weight
600 Nominal
34 lbs.
585.6 Actual
17 7/8" (454 mm)
18 3/8" (467 mm)
18 7/8" (479 mm)
toP vIEw
Electrical Wiring
Access Hole
CABP3
◊ Observe all governing codes and ordinances during
planning and installation. Contact your local building
department for further information.
◊ This appliance must be installed in accordance with the RV
series Raised Vent Installation Instructions.
All tolerances: ±1/16" (±1.6mm) unless otherwise stated
ELEctrIcAL LocAtIoN SIDE vIEw
ISomEtrIc vIEw
Specifications are subject to change without notice.
See installation instructions for additional details.
Revised 04/30/09 Page 1/1
PLANNING
GUIDE
WARNiNg
17" (432mm)
2" (51 mm)
1/2" (13 mm)
17"
(432 mm)
9 3/4"
(248 mm)
DUct LocAtIoN SIDE vIEw
Ø 7/8" (22mm)
(Grommet Hole)
5 3/4"
(146 mm)
3 3/4"
(95 mm)
3"
(76 mm)
9.1