Inserting A Buttonhole In Within A Sequence - DURKOPP ADLER 580 Operating Instructions Manual

10.6.6 Adding a buttonhole within a sequence
44
Important note
A single adding of a buttonhole program into a buttonhole
sequence is not possible.
Note down the programmed buttonholes that are
following.
Keys ñò
Select the desired line of the programmed buttonhole
sequence with the ñò keys.
"OK"-key Press the "OK"-key.
Keys ñò Select the desired buttonhole program with the ñò
keys.
Then alter the following buttonholes according to your
notes.
"ESC"-key Press the "ESC"-key.
You will get back to the main level.