Threading The Upper Thread - DURKOPP ADLER 580 Operating Instructions Manual

3.4

Threading the upper thread

1
2
Caution: Danger of injury !
The upper thread must only be threaded in when the machine is switched
off or in the "Threading mode" (see chapter "Threading mode").
–
Thread in the upper thread as shown in the illustrations.
–
In order to thread in the upper thread push the threading wire (part
of the accessories) through the hollow needle bar 1 from the
bottom to the top.
–
Bring the upper thread behind the looper.
–
Pull the wire with the upper thread down.
–
Bring the upper thread to the left behind the tension disc 2 and
thread it into the needle from rear to front.
1
15