Transporting The Machine - Clarke Image 26B Operator's Manual

TRANSPORTING THE MACHINE

How to Put the Machine in a Van or Truck
WARNING: The machine is heavy. Make
sure you use two able persons
to help assist the machine up
the ramp.
1. Make sure the loading ramp is no less than eight
feet long and strong enough to support the
machine.
2. Make sure the ramp is clean and dry.
3. Secure the ramp in position.
4. Lift the brush assembly into an upright position.
5. Align the machine on a level surface ten feet in
front of the ramp.
6. Push the machine to the top of the ramp.
7. Tie down the machine.
How to Remove the Machine From A Van
Or Truck
1. Make sure there are no obstructions in the area.
2. Make sure the unloading ramp is no less than
eight feet long and strong enough to support the
machine.
3. Make sure the ramp is clean and dry.
4. Secure the ramp in position.
5. Untie the machine.
WARNING: The machine is heavy. Make
sure you use two able persons to
assist the machine down the
ramp.
6. Assisting the machine down the ramp, position
yourself to maintain a slow downward speed.
Page -6- Clarke ® Operator's Manual IMAGE 26B