Table of Contents
Advertisement
1MRS757105 B
5.4.8.6
5.5
RER601/603
Technical Manual
Time adjust value (minutes) determines the value to add or substract from the NTP
value.
SMS Config
The SMS Config settings can be used to monitor the device status and to issue
simple commands remotely via SMS messages.
Enabled enables or disables the SMS configuration.
Get commands
Access determines if the get commands are allowed for everybody or only for the
defined phone, or if they are disabled.
Allowed phone determines the phone number for get commands.
Require password determines if the system password is required for get commands.
Set commands
Access determines if the set commands are allowed for everybody or only for the
defined phone, or if they are disabled.
Allowed phone determines the phone number for set commands.
Require password determines if the system password is required for set commands.
Allow execute commands determines if execute commands are allowed to be run on
the device.
Other
Reply error to unknown commands If set to "No", incorrect commands are silently
disregarded. If set to "Yes" the device sends an error message via SMS.
Reply error to unauthorized commands If set to "No" unauthorized commands are
silently disregarded. If set to "Yes", the device sends an error message via SMS.
Factory reset command (8 chars min) resets the device to the factory settings. Does
not require a system password. After an SMS command is sent, the factory settings
are applied. The password is also set back to the factory default.
Firewall menu
The Firewall menu is used to configure the device's built-in firewall. The firewall
can be disabled or enabled and separate rules may be created for the GPRS to the
device, GRPS to the LAN, and LAN to the GPRS configurations.
Section 5
RER601/603 Configurator
37
Advertisement
Table of Contents
