File Transfer - ABB RER601 Technical Manual

Section 10
Appendix 2 IEC 60870-5-104 interoperability
84
<100>:= Interrogation command
<101>:= Counter interrogation command
<102>:= Read command
<103>:= Clock synchronization command (option see 7.6)
<104>:= Clock synchronization command (option see 7.6)
<105>:= Reset process command
<106>:= Delay acquisition command
<107>:= Test command with time tag CP56Time2a
Parameter in control direction
(Station-specific parameter, mark each Type ID "X" if it is only used in the
standard direction, "R" if only used in the reverse direction, and "B" if used in both
directions.)
<110>:= Parameter of measured value, normalized
value
<111>:= Parameter of measured value, scaled value
<112>:= Parameter of measured value, short floating
point value
<113>:= Parameter activation

File transfer

(Station-specific parameter, mark each Type ID "X" if it is only used in the
standard direction, "R" if only used in the reverse direction, and "B" if used in both
directions.)
<120>:= File ready
<121>:= Section ready
<122>:= Call directory, select file, call file, call section
<123>:= Last section, last segment
<124>:= Ack file, ack section
<125>:= Segment
<126>:= Directory {blank or X, only available in
monitor (standard) direction}
1MRS757105 B
C_IC_NA_1
C_CI_NA_1
C_RD_NA_1
C_CS_NA_1
C_TS_NA_1
C_RP_NA_1
C_CD_NA_1
C_TS_TA_1
P_ME_NA_1
P_ME_NB_1
P_ME_NC_1
P_AC_NA_1
F_FR_NA_1
F_SR_NA_1
F_SC_NA_1
F_LS_NA_1
F_AF_NA_1
F_SG_NA_1
F_DR_TA_1
RER601/603
Technical Manual