Advertisement
Your wireless chime has different selectable tunes: Dong (one note) and
Ding-Dong (two note). The factory setting is for the Ding-Dong tune. This
tune can be changed by following the instructions below.
• Dong (one note tune)
Push button: Add jumper to location 8.
• Ding-Dong (two note tune)
Push Button: Remove jumper from location 8.
Note: All models have both front and back door tune capabilities. We recom-
mend the back door use the Dong tune and the front door use the Ding-Dong
tune. Models that include two push buttons will come factory set for front and
back doors. Decals on the rear of the push button will indicate its setting.
Inside Chime
598-1149-00
Tune Settings
Push Button Battery Replacement
Install an alkaline type A23 12 Volt battery. See
diagram inside push button for correct battery
orientation.
Inside Push
Button
Figure 6
-3-
* Code Settings 1-7
Must Match Both
Push Button and
Chime
Tune Setting
Note: Some models might re-
quire the use of tweezers to re-
move and replace the jumpers.
Advertisement
