3Com SuperStack II User Manual page 66

66 C 5: I
HAPTER NSTALLING OR
R I
EMOVING AN NTERFACE
3 If you are not installing another module, change the jumper to the
left-hand set of pins and reinstall the screw on the standoff.
Front panel
4 Reinstall the cover and the cover screws.
CAUTION: The DIP switches should all be in the down position. The DIP
switches are accessible through an opening on the side of the chassis.
DIP switches should all
be in the down position
5 If the bridge/router was mounted with brackets, reinstall the brackets and
remount it.
6 Reconnect the power cord and all cables.
M
ODULE
Install screws
Move the jumper to the
left-hand set of pins