64
C
5: I
HAPTER
NSTALLING OR
R
I
EMOVING AN
NTERFACE
3 Insert the new module.
Front panel
Install module by matching connectors
4 Reinstall the screw on the standoff.
5 Reinstall the cover and the cover screws.
CAUTION: The DIP switches should all be in the down position. The DIP
switches are accessible through an opening on the side of the chassis.
Install screws
DIP switches should all
be in the down position
6 If the bridge/router was mounted with brackets, reinstall the brackets and
remount it.
7 Reconnect the power cord and all cables.
M
ODULE
Connectors
Connectors
(on underside
of module)