3Com SuperStack II User Manual page 62

Bridge/router

Hide thumbs Also See for SuperStack II:

Table of Contents

5: I

HAPTER

NSTALLING OR

EMOVING AN

NTERFACE

3 If you are not installing another module, change the jumper to the

left-hand set of pins and reinstall the screw on the standoff.

Front panel

4 Reinstall the cover and the cover screws.

CAUTION: The DIP switches should all be in the down position. The DIP

switches are accessible through an opening on the side of the chassis.

DIP switches should all

be in the down position

5 If the bridge/router was mounted with brackets, reinstall the brackets and

remount it.

6 Reconnect the power cord and all cables.

ODULE

Move the jumper to the

left-hand set of pins

Install screws

Table of Contents

Need help?

Do you have a question about the SuperStack II and is the answer not in the manual?

Netbuilder si Superstack ii netbuilder si