Bevel Pinion Shaft; Bevel Pinion Assembly - Lotus TURBO ESPRIT Service Manual

Page 20
SECTION FB
a
the shaft with the grub screw. Smear the threads o f the grub screw with a
locking compound and tighten screw and lock w i t h nut.
7.
Fitthe5thdrivegear(S)togetherwithitsneedlerollercagecoatedwith
transmission oil, synchroniser (8) and operating fork assembly on the primary
shaft. Secure w i t h the deflector
(T)
and bolt
(A)
and tighten to
14.5
-
16.5 kgf.m (105
-
119
Ibf.ft).
FB.9.
-
BEVEL PINION
SHAFT
To Remove
1
.
Remove the Primary Shaft as previously described.
2.
Withdraw the bevel pinion through thegearbox casing into the differential
housing.
3.
As
the bevel pinion i s drawn through the casing, remove the3rd
&
4th driven
gear pair, adjusting washer, 1 s t and 2nd syncro hub assembly with gears and
needle roller bearings.
NOTE:
The two rear b a l l races and the innerbearing rings must be replaced
i n the same order, f i x labels to indicate positions.
r q P 0 n m l
k
I
Fig
. 8
Bevel pinion assembly