Lotus ELETRE 2023 Owner's Handbook Manual
  1. Manuals
  2. Brands
  3. Lotus Manuals
  4. Automobile
  5. ELETRE 2023
  6. Owner's handbook manual

Lotus ELETRE 2023 Owner's Handbook Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ELETRE 2023 and is the answer not in the manual?

Questions and answers

Вячесдав
February 25, 2025

здравствуйте! не работает бесключевой доступ LOTUS ELETRE мягко перезагружали, кнопку багажника держали 15 секунд , не помогает

0
1 comments:
Mr. Anderson
February 25, 2025

The keyless entry on the Lotus Eletre 2023 may not be working due to several reasons:

1. Contaminated Sensing Area – Dirt, frost, or other contaminants on the card key sensing area can interfere with unlocking or locking.
2. Extreme Temperatures – Very high or low temperatures can affect the function of the card key.
3. Strong Magnetic Fields – Exposure to strong magnetic fields can disrupt the key’s operation.
4. Incorrect Positioning – The user must be stationary and close to the exterior card key sensing area for it to work.

If unlocking fails, the card key should be moved away from the area and then repositioned close to the induction area. If the issue persists, contacting the Lotus Customer Care Centre is recommended.

This answer is automatically generated

0
323232323
May 12, 2025

321123321123

0

Related Manuals for Lotus ELETRE 2023

Summary of Contents for Lotus ELETRE 2023

  • Page 3 Welcome Built on the principles of innovation, focus and competitiveness over the decades, Lotus is the driving brand you can trust. Under the inheritance of the brand gene of intelligence and sports, the unique design of Lotus has been continuously expanded and innovated.

  • Page 4: Table Of Contents

    Radio information ....... . Lotus security system V Overview Device .
  • Page 5 Table of Contents ..........
  • Page 6 ... . . AUTO HOLD Lotus intelligent dynamic control (LIDC) ..... .
  • Page 7 Table of Contents ............... Network settings Seasonal tyre .
  • Page 8 Table of Contents ........

  • Page 12: Introduction

    The intellectual property rights involved in this manual are owned by Lotus; no part of this manual may be reproduced or Caution! duplicated without the prior written consent of the company.

  • Page 13: Vehicle Scrapping

    Only authorised treatment facilities for ELVs have the capacity functions. To ensure the reliability, comfort, and handling of the to process ELVs or parts of it. Please contact your local Lotus vehicle, Lotus recommends using original factory installed parts, authorized repairer for the nearest authorised treatment facility.

  • Page 14: Event Data Recorder（Edr

    The data recorded by the EDR needs to be collected using special may also violate local government regulations. Lotus will not be held diagnostic equipment connected to the vehicle. If necessary, please responsible for any damage, performance issues, or safety accidents contact the Lotus Customer Care Centre for this equipment.

  • Page 15: Ota System Upgrade

    Northern Ireland, BT41 1QS, After upgrade, the Over-the-Air Technology (OTA) will provide you with more new features. Lotus recommends that you should 698 Mhz–5 upgrade your car as soon as you receive a notification of upgrade TCAM so that you can experience the new features and services in the first Factory 1, time.
  • Page 16 Introduction Componen Componen Frequency Manufactur Manufactur Frequency Manufactur Manufactur t name / transmitted t name / transmitted band er name er address band er name er address Description power Description power B.GNSS: Developme 1,561– nt Zone 1,605MHz; Jiangsu C.WIFI: Province, 2,400–...
  • Page 17 Introduction Componen Componen Frequency Manufactur Manufactur Frequency Manufactur Manufactur t name / transmitted t name / transmitted band er name er address band er name er address Description power Description power nt Zone, Infotainme Wujin nt head ECARX District, unit Changzhou , Jiangsu 213149,...

  • Page 20: Overview

    Overview Front of vehicle Rear of vehicle 1. Integrated daytime running lamps ( p.97 ) 1. High mounted stop lamp 2. Front lidar ( p.195 ) 2. Rear lidar ( p.195 ) 3. Integrated charging port ( p.51 ) 3. Through-type RGB variable beam tail light 4.

  • Page 21: Internal

    Overview 10. Front passenger window control switch ( p.69 ) Internal 11. Combination switch on tunnel console ( p.61 ) ( p.136 ) 1. Buttons on left side of steering wheel ( p.80 ) 1. Door opening/closing ( p.61 ) 2.
  • Page 22 Overview 11. Bonnet release ( p.73 ) 12. Tailgate opening/closing ( p.74 )

  • Page 25: Safety

    Safety Seat belt Using the seatbelts correctly Wearing seat belts is the effective way to protect the passengers in Function of seat belt the vehicle in the event of a collision. Therefore, seat belts must be worn according to the laws. Wearing the seat belt correctly can restrain the driver and passengers in a limited position.This can effectively protect the safety of the drivers and passengers in the event of a collision.
  • Page 26 Never adjust the seat belt shoulder height adjuster while driving, so After an accident, airbags, seat belt pretensioner and other as to avoid accidents. related components must be inspected and replaced at a Lotus authorized repairer, if necessary. Note! After the adjustment, check if the seat belt shoulder height adjuster...
  • Page 27 Warning! If you notice signs of wear, cracking or other damage to your ■ seat belts, be sure to contact a Lotus authorized repairer for replacement. Avoid contact with chemicals and liquids. If the seat belt cannot ■...
  • Page 28 When the seat belt is not in use, it should be fully retracted and ■ never draped. If the seat belt cannot be fully retracted, be sure to contact a Lotus repairer for an overhaul. People with disabilities should also wear seat belts correctly ■...

  • Page 29: Airbag Introduction

    If the airbag warning lamp stays on after the vehicle is powered the seats. on, be sure to pull over and contact Lotus Customer Care Centre Do not vigorously tap the airbag area in the centre of the ■ immediately.

  • Page 30: Location Of Airbag

    Safety Airbag warning sign The passenger sunshade has airbag warning signs on the inside and outside. The sign acts to remind you not to use the rear-facing child restraint system in the front passenger seat (with the passenger frontal airbag on). Location of airbag 1.

  • Page 31: Airbag Deployment Conditions

    Safety 2. Passenger frontal airbag Warning! Airbags may produce dust (fumes) when unfolded, and prolonged exposure to the dust (fumes) may cause skin or eye discomfort. If the eyes and skin are affected by fumes and dust, rinse the eyes and skin immediately with clean water.

  • Page 32: Airbag Disabling

    Safety The collision point is concentrated in one location (e.g., trees or ■ protective poles) and the impact force is not strong enough to be transmitted to the airbag sensor. Supplemental Restraint System (SRS) has failed. ■ Airbag disabling 1. The front passenger airbag indicator has been turned on 2.

  • Page 33: Child Safety Seat

    Child safety seat safety of children in a better way. To ensure safety and stability, Lotus recommends that you should Please use a child safety seat that is suitable for children and use a child safety seat that is suitable for children and complies with complies with applicable regulations or standards.
  • Page 34 Safety Passenger front frontal airbag off. Suitable for “universal” category restraint approved for use in this mass group . Suitable for forward facing “universal” category restraints approved for use in this mass group . Suitable for particular child restraints given on attached list.
  • Page 35 Safety Suitable for i-Size and ISOFIX child restraint ISO/B3: forwardr-facing toddle restraint system system . with full size. Seat position with top tether anchorages . ISO/R3: rear-facing toddle restraint system with reduced size. Suitable for forward facing child restraint system. ISO/R2: rear-facing toddle restraint system with reduced size.
  • Page 36 When installing a child safety seat, adjust the backrest angle of Note! ■ the seat reasonably to ensure stability of the child safety seat. Top tethers apply to forward-facing child safety seat. Lotus ■ When installing a child safety seat, adjust the height of the ■...
  • Page 37 Safety Recommended child restraint system — Secured with i-Size and Seat position / Seat number ISOFIX syste 4） Driver Passenger Rear outboard Authorisation Weight class Manufacturer Type number Left Centre Right categories Pebble 360 + Airba Group 0 & 0+ Airba Maxi Cosi FamilyFix 360...
  • Page 38 Safety Seat position / Seat number Do not place a reanward-facing child seat on the passenger seat when the airbag is activated 4） Driver Passenger Rear outboard The universal belted CRS applies to all mass groups; Only forward-facing child restraint system; Left Centre Right...
  • Page 39 Safety Adjust the CRS seat back angle to make the child seat be Child restraint ■ Mass level Size category system installed stable. The backrest of the child restraint system must lie as flat as possible against the back rest of the vehicle seat.
  • Page 40 Safety Installation of I-Size child safety seat for four-seater models* The top tether fixture is located behind the rear seat backrest. Observe the installation instructions for the child safety seat and I-Size anchorages are located in the two rear outer seats, and the use I-Size anchorages.

  • Page 41: Child Safety Lock

    Safety The top tether fixture is located behind the rear seat headrest. disabled. By pressing the child safety lock switch again, the child safety lock will be deactivated, and the related functions will be Observe the installation instructions for the child safety seat and restored.

  • Page 42: Lotus Security System V

    Lotus security system V activate the E-call function; At this time, your mobile APP will also receive the corresponding prompt message sent by the The functions of the Lotus security system V can prevent others system. from illegally entering and starting your vehicle.
  • Page 43 The steering electronic lock is an anti-theft protection device. After The vehicle is provided with a Lotus security system V, but it ■ it is turned on, the steering wheel of the vehicle will be locked, so...

  • Page 46: Device

    Device If the connector is smoking or melting, never touch the ■ Charging charging cable. If possible, stop the charging process. Press the emergency stop switch on the charging station in any case. Charging cable Make sure that the charging cable is out of the reach of children. ■...
  • Page 47 Device Note! When the opening and closing speed of the charging port cover plate is significantly slowed down, it is the position fault of the charging port cover plate and is in a self-learning state. Cover closing button Click the icon in the CSD, select the integrated charging port ■...
  • Page 48 Device otherwise the function of the electronic medical equipment may Warning! be affected, resulting in personal injury or death. Unlock the vehicle before inserting/pulling out the charging ■ Never remove or modify the charging port or charging device. ■ gun. Always insert/pull out the charging gun upright without After charging, close the charging cover in time to prevent the ■...
  • Page 49 The charging current can be appropriately reduced by referring to the charging current displayed on the central display screen to ensure normal charging. If the trip continues, please contact the Lotus authorized repairer. Charging setting interface Click the icon on the CSD to select the Charging APP and enter the charging setting interface.
  • Page 50 The heat preservation of battery can maintain the high voltage If the preheating function of high voltage battery fails or is ■ battery at the appropriate working temperature and ensure its abnormal, please contact the Lotus authorized repairer in a performance at a low temperature. timely manner. Note! If you need to use the vehicle in a low temperature environment, ■...

  • Page 51: Charging Guidance

    Device White (always on): Indicates that the indicator lamp is high voltage battery. Long-term parking will reduce the heating illuminated automatically when the charging port cover is effect. opened. Charging guidance Green (flash): The charging is normal within a period of time after the charging plug is connected.
  • Page 52 Emergency unlocking of electronic lock Note! After charging is stopped, you can choose Resume Charging, and it is recommended that you use a Lotus AC charging device to resume charging. 4. Press the cover closing button to automatically close the charging port cover and return the charging plug to the charging pile.
  • Page 53 Device Warning! When using the emergency rope of the electronic lock, please fully open the door and keep it still to avoid pinching your fingers. Note! If the charging plug cannot be pulled out due to vehicle power outage or electronic lock failure, the emergency rope can be pulled to unlock it.

  • Page 54: Key Introduction

    Card key Super fast charging Super fast charging is only available at Lotus DC charging piles. The pile starts to charge the car immediately it is connected. If you need to use super charging, you can make an appointment in...
  • Page 55 When the vehicle is unlocked and the four doors are closed, ■ to unlock. If still unable to unlock please contact the Lotus press a single button to lock the vehicle. Customer Care Centre.
  • Page 56 Device When the vehicle is locked, press and hold the single button to ■ Note! activate the car search function. If the remote control key is insensitive, try it again by directing ■ Caution! not at the Bluetooth antenna with the remote control key held in your hand.
  • Page 57 Device When the vehicle is READY, the combination instrument has a ■ low key battery. When replacing the key fob battery, be sure to follow the steps below: 1. Insert the thimble into the key fob battery removal hole and push to unlock the battery lock.
  • Page 58 When installing the cover on the back of the key, be careful not ■ Open Lotus APP and create a digital key on your phone in the to damage or deform it. following steps: 1. In the Lotus APP, select More APP and click Digital key .
  • Page 59 4. Follow the prompts on the mobile phone to save the digital key Open Lotus APP and create a digital key on your phone in the to the mobile wallet APP. following steps: 1. In the Lotus APP, select More APP and click Digital key .
  • Page 60 Note! to log in to the Lotus APP, click on More Apps , and then click on Digital Key .The Lotus APP will initiate the deletion of the original The total number of key fobs, remote keys and digital keys shall ■...

  • Page 61: Doors

    Device Click the icon in the CSD, select Vehicle , and click to activate the Note! two-step unlocking function. When transferring digital key permissions, please park the ■ With this function activated, only the driver door can be unlocked vehicle in a safe and wireless location before proceeding. when the vehicle is unlocked with the key fob.
  • Page 62 Device Locking/unlocking doors from outside Do not leave children alone in the vehicle unattended. ■ Note! When using other valid keys to lock the vehicle, the keys left in ■ the vehicle will be disabled until the vehicle is unlocked. Please make sure that the doors are completely closed before ■...
  • Page 63 Device Activating super lock When the super lock is activated, the door cannot be opened from inside the vehicle. When the vehicle is in personalization mode, the instrument cluster displays “inactive”. When there is no one in the vehicle, the super lock can be activated in the following two ways: When all doors (including tailgate and bonnet) are closed and ■...
  • Page 64 CSD, select the Vehicle , and click to activate ■ no children or pets in the vehicle, please contact an authorised the reduced guard. Lotus retailer in time. Warning! Reduced guard Do not leave the vehicle for long periods of time when children or Activating the reduced guard can temporarily disable the super lock, pets are left in the vehicle.
  • Page 65 Device Unlocking/locking doors from inside Central lock on the front tunnel console Door opening/closing 1. Central unlock switch When the vehicle is in a locked (non-super lock) state, press the 2. Central lock switch front door switch to unlock and open the corresponding door. At the Press the central lock switch on the front tunnel console to lock/ same time, the indicator light on the central lock button is off, and unlock the vehicle.
  • Page 66 Device Opening/closing doors from outside Do not leave children alone in the vehicle unattended. ■ Caution! If the door is frozen or blocked, do not vigorously pull or tap the flush door handle, as this may damage it. Note! When using other valid keys to lock the vehicle, the keys left in ■...
  • Page 67 Device Auto lock while driving With all doors (including the bonnet, tailgate, charging port cover) closed and the vehicle speed over a certain speed limit, the indicator on the central lock button will be illuminated to indicate that the vehicle is locked. Unlock at collision In the event of a collision, the vehicle automatically releases the central control lock and unlocks the four doors.
  • Page 68 In case that both methods are not applicable, handle to open the driver's door; or use the card key, the driver's please contact Lotus Customer Care Centre. door will automatically unlocked. 4. After the unlocking is completed, disconnect the external power supply, load the external wire that has been insulated back into the towing hook cover, and close the cover.

  • Page 69: Windows

    ■ opening the door, at which time closing the door directly will cause damage to the vehicle, do not close the door and contact the Lotus authorized repairer. Auto close windows on lock Emergency handle Pull the emergency handle in the door trim panel pocket to unlock and open the door.
  • Page 70 Device Window regulator switch 1. Manual up/down: Pull up or press down to the first position, the windows will rise or lower; release the switch, the windows will stop moving. 2. Auto up/down: Pull up or press down to the second position, the windows automatically go up/down.
  • Page 71 Device Remote window opening/closing on mobile APP Note! The window regulator switch on rear door trim panel can be ■ used to lift or lower the rear left and right windows. Please remove the snow and ice on the surface of the window in ■...
  • Page 72 Device Window opening/closing via central lock Auto rising in rain Central lock at the front of tunnel console Rain and light sensor module (RLSM) All windows automatically close completely when the RLSM at the 1. Central unlock switch front windscreen detects rain. 2.

  • Page 73: Bonnet

    Device Warning! Before closing the windows, make sure that no one or object is ■ in the way of window closing, otherwise, it may cause personal injury and car damage! In case that there is a child in the vehicle, the child safety lock ■...

  • Page 74: Tailgate

    Device Closing of bonnet Do not forcefully close the bonnet or let it fall freely. ■ Do not press the bonnet with one hand, as this may cause the 1. Lower the bonnet slowly until the bonnet contacts the latch. ■...
  • Page 75 Device Tailgate switch on driver door Note! If the vehicle is locked, the direction indicator lamps will flash once when the tailgate is locked. Opening/closing of tailgate by CSD Tailgate switch on driver door When the tailgate is closed, press and hold the tailgate switch on the driver door to unlock and fully open the tailgate.
  • Page 76 Device Unlocking tailgate on mobile APP Opening/closing of tailgate by kicking action * Tailgate kick induction zone Tailgate unlock switch on mobile APP Carry a key fob or digital key to do a kicking action in the sensing When the vehicle is locked, click the tailgate switch on the mobile area of the tailgate, and the tailgate will be automatically opened/ APP to unlock the tailgate.
  • Page 77 If the fail to open/close the tailgate, please re-attempt with feet. ■ If the tailgate still cannot be opened/closed, please contact a Lotus authorized repairer in time. Tailgate opening/closing switch Tailgate closing switch Press the tailgate closing switch in the unlocked state of the vehicle, and the tailgate will automatically close.
  • Page 78 Device Emergency opening of tailgate from the boot In an emergency, you can try to open the tailgate from the boot. 1. Flip outward from the top edge to open the protective cover. Tailgate emergency unlocking lever Setting tailgate opening height You can set the tailgate opening height by following the steps below: Tailgate emergency unlocking protective cover...

  • Page 79: Steering Wheel

    Device Note! You can also manually open the tailgate to the highest position, and press and hold the tailgate switch until you hear a audible signal to restore the tailgate opening height. Steering wheel Steering wheel adjustment Tailgate closing switch Warning! When operating the tailgate, it is important to make sure there are no people in the track of the tailgate opening or closing, otherwise...

  • Page 80: Paddles On Steering Wheels

    Device 7. Right multi-function button Warning! Steering wheel button operation To avoid dangerous driving and accidents, do not adjust the steering wheel while driving. Paddles on steering wheels Press the left multi-function button: Place your thumb in the middle of the multi-function button, and press the button until there is a crisp sound.
  • Page 81 Device Method 1 Toggle the left multi-function button up and down: Place your thumb in the middle of the lower or upper part of the multi-function Place your thumb in the middle of the multi-function button, and button, and toggle it up or down until a crisp sound is heard. toggle it left and right until a crisp sound is heard.
  • Page 82 Device Place your thumb on the raised position of the multi-function button, and toggle it down obliquely until a crisp sound is heard. Toggle the energy recovery paddle up: Put your finger under the paddle, and toggle up the paddle until a crisp sound is heard. Toggle the following distance button up and down: Place your Note! thumb on the lower or upper part of the following distance button,...

  • Page 83: Steering Wheel Heating

    Device Auto-start steering wheel heating Steering wheel heating Manual steering wheel heating You can turn on or off the auto-start steering wheel heating function from the climate settings interface on CSD. After turning on the auto-start steering wheel heating function, Steering Wheel Heating Setting interface when the temperature outside the car is too low, the auto-start Click the TEMP in the CSD to switch to the climate control interface,...

  • Page 84: Combination Instrument

    Device In the process of automatic heating, you can click icon on ■ the front climate control interface to turn off the steering wheel heating once. Remote control of steering wheel heating Mobile APP steering wheel heating interface Click the icon to turn steering wheel heating on or off;...
  • Page 85 Device Overview of driver instrument cluster Note! Do not operate the instrument cluster while the car is in motion. Overview of passenger screen display 1. Left indicator display area: displays information such as the status of external lights, driver assistance systems, etc. 2.
  • Page 86 Device Click on the desktop of the front passenger side instrument cluster, and slide the screen left and right to switch the multimedia content. The front passenger side instrument cluster displays safety information. When the front passenger seat belt is not fastened, the seat belt reminder and door open warning will be given.
  • Page 87 Device Mileage Trip 1 and average power consumption 2. Press and release the TRIP button for the second time to 3. Press and release the TRIP button for the third time to check Trip 1 (mileage and average power consumption) in the check Trip 2 (mileage and average power consumption) in the instrument cluster;...

  • Page 88: Indicators And Warning Lamps

    Device Indicators and warning lamps Indicator icon Turn indicator: when you flick the turn indicator switch downward, the left indicator flashes. When the hazard warning lights switch is turned on, the direction indicator lamps on both sides flash at the same time.
  • Page 89 Device Adaptive driving beam(ADB): when activated, the Lane keep assist(LKA) off: when LKA is off, this blue high beam indicator will be illuminated. indicator is illuminated. Rear fog light: when the rear fog light is turned on, Autonomous emergency braking (AEB) off: when this indicator is illuminated.
  • Page 90 Device Highway assist (HWA): when HWA is turned on but Charging plug connection: when the charging not activated, the white indicator is illuminated. plug is connected to the vehicle, the indicator is illuminated. Highway assist (HWA): when activated, the blue Child presence detection:...
  • Page 91 Position lamp failure: when the position lamp fails, risk. Before driving, make sure the fault is cleared. If you are not this warning light is illuminated. familiar with the specific fault, please contact the Lotus Customer Care Centre for an inspection.
  • Page 92 Device Traffic sign identification (TSI) failure: when the TSI High voltage battery failure: when the high voltage fails, this warning light is illuminated. battery fails, the warning light will be illuminated. Lane keep assist(LKA) failure: when the LKA failure, System failure: when the system fails, the warning this warning light is illuminated.
  • Page 93 Device Driver monitoring system failure: when the driver Tyre pressure monitoring system(TPMS) failure: monitoring system fails, this warning light is when the tyre pressure of one or more tyres is too illuminated. low, this warning light is illuminated. When the tyre pressure monitoring system fails, the warning light flashes a few times and then solid on.

  • Page 94: Head-Up Display (Hud)

    Device Seat belt reminder: When the seat belt is not Head-up display (HUD) fastened, the warning lamp of the 5-seat vehicle is lit, which means that the warning lamp of the corresponding seat is lit at the same time. Head-up display (HUD) projects vehicle-related information onto front windscreen so that it is easier for the driver to obtain legible Brake system failure: when the braking system fails, information rapidly during driving, thus improving driving safety.
  • Page 95 Device Head-up display (HUD) You may not observe the HUD clearly if you are wearing ■ polarized sunglasses. Please adjust the brightness of the HUD or take off your sunglasses. HUD settings on steering wheel Press the Menu/Voice button upward to activate HUD settings. ■...
  • Page 96 Device Press the right multi-function button left and right to set the ■ Cleaning and maintenance of HUD HUD ON/OFF, height, brightness, snow mode, and AR mode respectively. Clean the inside of the windscreen to remove any dirt or film that may reduce the brightness or clarity of the HUD image.

  • Page 97: Lighting

    HUD. Note! If the front windscreen needs to be replaced, please contact ■ Lotus Customer Care Centre for replacement as soon as possible. Warning! When driving in snow or when the road surface is heavily ■...
  • Page 98 Device Position lamps: When the gear to the park (P) gear, and the roller is rotated to this position, the low beam is turned off; and the roller rotates to this position for 2 seconds, all external lights will be turned off. When the to the drive (D) gear, the external lights will enter AUTO mode.
  • Page 99 Device The roller is located at . By pushing the stalk switch forward, the high beam turns on. The high beam indicator on the instrument cluster is illuminated. The roller is located at . By pushing the stalk switch forward, activates the adaptive driving beam (ADB) function.
  • Page 100 Device Direction indicator lamp Warning! The adaptive driving beam(ADB) is an auxiliary lighting system in which the driver is always responsible for correctly and manually switching the high beam and low light depending on traffic conditions, visibility and legal requirements. Rear fog lamp Move the stalk switch down/up slightly, and the direction indicator lamps...
  • Page 101 Device Adaptive front lights function Handlebar nest light The adaptive front lights will automatically adjust the light pattern according to different driving conditions to provide the driver with the best lighting. When the ambient light outside the vehicle is insufficient, and when the vehicle is unlocked, the handlebar light is illuminated to illuminate the inside of the door handle, and then it is automatically extinguished after a period of time.
  • Page 102 Device Welcome function Note! If a courtesy pedal is equipped, the door sill lamp will light up ■ immediately after you open the door to facilitate you getting on in a dim environment. When the vehicle in a non sleep state is unlocked using the ■...

  • Page 103: Internal Lighting Control

    Device You can click the icon on the CSD, and select Lights to enter the Internal lighting control external light setting interface, where you can click to turn on or off the Tourist mode . Ambient lights* Trailer lamp check* The ambient lights is divided into dynamic ambient lights and static When your vehicle is towing another vehicle, you can test whether ambient lights.
  • Page 104 Device Ambient lights adjustment* Adjustment of ambient lights brightness You can drag the slider to any position of the brightness adjustment Ambient lights colour adjustment bar to set the brightness of the ambient lights. 1. System default colour 2. Custom colour adjustment mode Select the custom ambient lights colour adjustment mode to freely choose the colour of the ambient lights.
  • Page 105 Device Reading lamps Note! When the front reading lamp is turned on, the ambient lamp in ■ the outer ring will be white without color conversion effect. When the ambient light is weak, do not turn on the front reading ■...
  • Page 106 Device Boot light Rear reading lamps* The operation method of the rear reading light can refer to the front When the boot lid is opened, the light in the boot will be illuminated reading light. automatically; when the boot lid is closed, the light in the boot will go out automatically.

  • Page 107: Wiper Control

    Device Courtesy lamp Wiper control Front windscreen wipers and washer When the external environment is dim, the courtesy lamps will be illuminated automatically as the doors are opened and they will automatically go out as the doors are closed. Single wiping: flick the wiper lever down from position 0, the wiper starts working and then returns to the lowest point after single wiping.
  • Page 108 Device Continuous wiping at normal speed: flick the wiper Please use qualified washing solution. Unqualified washing ■ lever upwards and the wiper works at normal speed. solution may cause damage to the scrubber or corrosion or damage to the glass. Fast continuous wiping: continue to flick the wiper Automatic rain-sensing wiper lever upwards, and the wiping speed is accelerated.
  • Page 109 Device cluster will be illuminated, and the wiper auto- Warning! scrubbing function is turned on. Do not rely entirely on the automatic rain-sensing wipers. Always Caution! adjust the wiping manually according to the actual situation. When turning on maintenance mode or using the auto-wash function, disable the auto-scrubbing function first.

  • Page 110: Wing Mirror Adjustment

    Device Lens adjustment Warning! During the cold season, if the washer fluid freezes on the windscreen, do not use the the wiper, otherwise the driver's vision may be obscured. Automatic heating of wiper* When the ambient temperature is too low, the vehicle automatically heats the wiper arm to prevent the nozzle of the water wiper from being frozen by rain and snow.
  • Page 111 Device 2. Right multi-function button Press the right multi-function button to select an outside ■ mirror, and scroll the right multi-function button up, down, left, and right to adjust the position of the outside mirror lens. Press the Menu/Voice button upward to activate the mirrors; ■...
  • Page 112 When the vehicle is started, the streaming mirror will start the self- test. If you find a fault alarm message on the screen, please contact the Lotus Customer Care Centre in time. Press the streaming mirror adjustment switch to activate it;...
  • Page 113 Device 2. Right multi-function button Note! Press the right multi-function button to select a streaming ■ mirror, and scroll the right multi-function button up, down, left The streaming mirror can effectively minimize the drive blind ■ and right to adjust the camera position. spot, expand the driver's field of vision, and improve the safety of driving and parking.
  • Page 114 Device 3. Reset switch 4. HD/wide field of view toggle switch Note! Press and hold the reset switch to restore both streaming media screens to the default view of the current mode. You can click and drag the driver’s streaming media interface to select different view angles as needed, and click the left/right side view switch to switch to the view adjustment interface of corresponding side.
  • Page 115 When any of the following faults occurs to the streaming mirror, the The outside mirror folding switch is located on the driver door inner streaming interface will display the fault iconand a classical prompt trim panel. on the instrument cluster. Please observe and contact the Lotus Customer Care Centre in time.
  • Page 116 Device Folding of streaming mirror* When the car is powered on or in READY state, press the outside mirror folding switch to allow the mirrors on both sides to be folded or unfolded simultaneously. When the car is locked, the outside mirrors will fold automatically. When the car is unlocked, the outside mirrors will unfold automatically.
  • Page 117 Device Mirror tilt when reversing When in R gear, the outside wing mirrors are automatically adjusted downwards, allowing the driver to observe the ground more clearly. When in other gears, the outside wing mirrors automatically return to their original positions after a short time. When the vehicle is in reverse gear R, the exterior rearview mirror adjustment switch can be used to automatically adjust to the appropriate downward flipping position and memorize the...
  • Page 118 Device Note! Note! If the reversing speed is greater than 10km/h, the wing mirrors If the reversing speed is greater than 10km/h, the wing mirrors ■ ■ will return to the normal position. will return to the normal position. The streaming mirror automatically flips down when backing up, The streaming mirror automatically flips down when backing up, ■...
  • Page 119 Device Outside mirror heating via front console Streaming mirror defrosting/defogging switch By pressing the icon on the front console, you can activate or Click the TEMP in the CSD to switch to the climate control interface deactivate the defrosting/defogging function of the outside mirrors where you can activate or deactivate the defrosting/defogging to remove rain, water mist or ice and snow from the mirrors.

  • Page 120: Inside Mirror Adjustment

    Device Note! Inside mirror adjustment The streaming media mirror can also monitor the ambient light intensity through a photosensitive sensor and automatically adjust the brightness. Automatic anti-glare outside mirror* When the ambient light outside the vehicle is insufficient and the drive gear (D) is engaged, the automatic anti-glare outside mirror can automatically weaken the light from the rear, so that the rear view is in a good observation state.

  • Page 121: Garage Door Opener(Homelink)

    Device Automatic anti-glare inside mirror Creating HomeLink The automatic anti-glare inside mirror can automatically dampen the light coming in from the rear depending on a sensor on the inside mirror, so that the rear field of view is in a good state of observation.
  • Page 122 Device HomeLink indicator remains in green or flashes quickly, release Note! the garage door remote control. The location, name, and color of the buttons may vary with the 3. Press and release the button that needs to be set, and if the manufacturers, therefore please refer to the user manuals.

  • Page 123: Seat

    Device Resetting HomeLink on a single button If the HomeLink on a single button is abnormal and needs to be reset or replaced, observe the following steps to complete the resetting: 1. Press and hold the button on which the HomeLink needs to be reset, and after 20s, check that the HomeLink indicator slowly flashes orange.
  • Page 124 Device position should be as far back as possible to ensure a You can only operate up to two electric seat adjustment ■ comfortable ride and easy handling. switches at a time to adjust the seat. Before driving, rock the front seats back and forth to ensure ■...
  • Page 125 Device 3. Press the front/rear of the control button to adjust the seat person wearing the belt of the over-inclined seat may get lower back support. than the seat belt and thus injured. 4. Move the control button forward/backward to adjust the seat Before moving the seat, make sure that the seat movement area ■...
  • Page 126 Device The easy access function, if turned on, will also not work when ■ the driver seat is not far from the rearmost position. Caution! In the process of easy access, please pay attention to the rear passengers to avoid squeezing and collision. You can interrupt the easy access by manually adjusting the seat switch.

  • Page 127: Rear Seat Adjustment

    Device Do not extend your feet out of the window, or place them on the ■ Rear seat adjustment seat, as this may cause personal injury. Do not incline the seat backrest excessively, otherwise the ■ Rear seat adjustment protection effect of the seat belt will not be guaranteed. For The electric adjustment button can be used to adjust the seat example, in the event of an accident or emergency braking, the position to a comfortable sitting position.
  • Page 128 Device Rear headrest The rear passengers can manually adjust the height of the rear headrest according to their height until their heads can rest completely against the headrest: Pull upward to adjust the rear headrest upward. ■ Press and hold the rear headrest button to adjust the rear ■...
  • Page 129 Device 1. Unlock indicator Press the locking device and fold the rear seat backrest forward when the unlocking indicator is fully ejected. Pull out the rear seat belt at the corresponding side, turn the seat backrest backward, and the unlock indicator retracts, that is, the rear seat backrest is fully extended and locked.
  • Page 130 Device CO-PILOT Warning! Before driving, shake the rear seat back and forth to make it ■ lock in place, otherwise, in the event of an accident or sudden braking, personal injury may occur. Do not extend your feet out of the window, or place them on the ■...
  • Page 131 Device Rear seat memory* Note! During the automatic adjustment of the seat, if the seat position is manually adjusted, the automatic adjustment of seat will be stopped. Rear seat massage* Rear seat memory setting interface Click the icon on rear display and select Seat to access the seat settings interface, where the position of rear seat can be adjusted as required.

  • Page 132: Seat Heating

    Device Store the removed rear headrests properly, otherwise the ■ moving headrests may cause injury in the event of an accident or emergency braking. Refit the rear headrest 1. Align the headrest rod with the mounting hole on the seat backrest.
  • Page 133 Device When you click the seat heating icon to turn on seat heating, Warning! the default is level 3. Repeat clicking to decrease the level further until the heating function stops. If you or the passengers of the vehicle are unable to monitor the Intelligent voice can turn front seat heating on/off or adjust the temperature of the seat or the parts of the body that come into ■...

  • Page 134: Seat Ventilation

    If the heating function fails, the seat heating icon in the CSD ■ minutes or without restrictions. (The default is 15 minutes.) turns grey, please contact the Lotus Customer Care Centre in time. Rear seat heating* When the vehicle is restarted, if the difference between the ambient...
  • Page 135 If the ventilation function fails, the seat ventilation icon will ■ the position of front seat ventilation. turn to grey. At this time, please contact the Lotus authorized Switch to the A/C setting interface through the Climate on the ■...

  • Page 136: Air Conditioner

    It is recommended that you regularly send your vehicle to the ■ Air conditioner Lotus Customer Care Centre for inspection or replacement of the A/C refrigerant. If you have any problems with the A/C system during this period, please contact the Lotus Customer Four-zone air-conditioner control system Care Centre in time.
  • Page 137 Device Streaming mirror defrosting/defogging switch: click 1. ION (negative oxygen ion) switch* to turn on or off the exterior rear view mirror display 2. Top control bar defrost/defog function. 3. Streaming mirror defrosting/defogging switch* 4. A/C switch A/C switch: click to turn on or off the A/C 5.
  • Page 138 Device Rear windscreen and outside mirror defrost/ Face blowing mode: when the air outlet is opened, defogging switches: click to turn on or off the the air flow blows out from the centre and side air defrost/defogging functions of rear windscreen and outlets, blowing the side faces of the driver and outside mirrors.
  • Page 139 Device During operation or when the air conditioning system is turned Warning! ■ off, there may be a slight sound similar to running water or Before driving, make sure that all windows are free of ice, snow purring, which is a normal phenomenon when the refrigerant is ■...
  • Page 140 Device function to minimize the accumulation of moisture or mold Note! inside the air conditioning system. Long upward or downward temperature adjustment switch can ■ quickly adjust the A/C temperature. A/C control panel of front tunnel console Even if the high voltage battery is low, the use of the A/C will ■...
  • Page 141 Device Enable maximum defrost function. 1. Top control bar ■ Adjust the blowing mode. ■ 2. Rear left/right air outlet mode Turn on A/C MAX. ■ 3. Rear left/right temperature adjustment switch Turn off the AUTO switch. ■ 4. Rear left/right Auto A/C switch Temperature adjustment 5.
  • Page 142 Device Face blowing mode: when the air outlets are opened, the air flow blows out from the centre and side air outlets, blowing the faces of the rear passengers. Feet blowing mode: air flow blows towards the feet of the rear passengers. Auto mode: after clicking it on, the A/C system automatically controls the temperature, air volume and air direction according to the temperature you...
  • Page 143 Device Rear A/C system switch: click to turn the rear A/C Click the Climate on mobile APP interface, switch to the A/C ■ system on or off. setting interface, and click HI or LO to directly adjust the temperature to the highest or lowest when the air conditioning is turned on.
  • Page 144 When the service life of the air conditioning filter element is ■ less than 20%, please go to the Lotus Customer Care Centre to replace it in time. Reuse of the air conditioning filter may lead to a decrease in ■...
  • Page 145 Device Warning! Never leave children or pets unattended in the car. Under extreme external conditions, the interior of the car may become dangerously hot even if the cabin overheat protection function is activated. Note! When the high voltage battery capacity is less than 20%, the cabin overheat protection function in the vehicle cannot be activated or stopped.

  • Page 146: Air Outlet

    Device Air inlet Air outlet Overview of front air outlet There may be leaves and insects built up in the A/C exterior vents in the grille under the rear of the bonnet, so please clean up them regularly to avoid blockages. 1.
  • Page 147 Device Overview of rear air outlet Overview of rear air outlet* 1. Rear foot air outlet 1. Rear foot air outlet 2. Rear air outlet of tunnel console 2. Rear air outlet of tunnel console Air conditioner outlet adjustment The front air conditioner outlet is arranged with 4 electric adjustable air outlets, the rear is arranged with 2 electric adjustable air outlets, and each side of the B pillar is arranged with 1 manually adjustable air outlet, and each air outlet can be adjusted separately.

  • Page 148: Panoramic Sunroof

    Device Wind beam adjustment interface Rear side air outlet On the front air conditioner control screen, double-click to turn on The air outlets on the interior panels on both sides of the B-pillar the corresponding crosswind beam and double-click again to turn it can adjust the wind direction through the blades at the air outlets.
  • Page 149 Device Transparency adjustment Panoramic sunroof transparency adjustment interface 1. Auto transparency 2. Transparency adjustment switch You can click the icon on CSD as needed, select the Vehicle , and switch to the transparency adjustment interface. Manual transparency adjustment Roof glass transparency has multiple gears, click or drag the slider to any position on the transparency adjustment slider to set the roof glass transparency.

  • Page 150: Wireless Device Charging

    Device Automatic transparency adjustment Wireless device charging Turn on the roof glass transparency automatic adjustment switch, the roof glass transparency will be adjusted automatically according to the ambient temperature and light intensity. Note! After auto-adjust is turned on, manual adjustments cannot be made. The roof glass transparency can also be adjusted automatically by any of the following operations: After the car is unlocked, the roof glass transparency is adjusted...
  • Page 151 Device Caution! Before using wireless charging, make sure your card keys, credit ■ cards or other magnetic objects are far away from the charging area to avoid damage. Do not put the unattended mobile phone in the vehicle for ■ charging, so as to avoid the safety risk.

  • Page 152: Car Power

    If it is still impossible to charge, please contact a Lotus Customer Care Centre in time. During charging, the temperature of the mobile phone itself ■...
  • Page 153 Device Rear TYPE-C ports terminal products. Charging port can be used for charging terminal products such as mobile phones/tablets. There are two TYPE-C ports in the lower centre of the rear seat After the armrest is closed, the charging cable or data cable can be cushion, which can be used by passengers for charging.

  • Page 154: 12V Power Supply

    Device Rear TYPE-C ports* 12V power supply in front armrest box Flip the protective cover to the right to use it. There are two TYPE-C ports in the rear central armrest box, which can be used by passengers for charging. 12V power supply There are 12V power supplies in the front armrest box and the boot respectively, which support a maximum power of 120W to charge...

  • Page 155: Sun Visors And Vanity Mirrors

    Device Press the front of the protective cover to automatically pop up the Sun visors and vanity mirrors cover for use. Warning! Sun visor Do not insert your fingers or conductive objects (such as pens) ■ Rational use of sun visors can effectively block sunlight and avoid into the socket, and do not touch the socket with wet hands, sun glare.
  • Page 156 Device Flip the sun visor to the side if sunlight enters the vehicle from side Warning! windows. Do not uncover the vanity mirrors during driving, otherwise the light Vanity mirror reflected from them may endanger you and others. The vanity mirrors are installed on the inner side of the sun visors. Flip down the sun visor and flip up the vanity mirror cover to use the mirror, and the vanity mirror light will be illuminated automatically.

  • Page 157: Storage Device

    Device cups, circular or cylindrical objects. Otherwise, in the event of an Storage device emergency braking or collision accident, it may cause personal injury or damage to objects due to collision within the vehicle. Front storage device Rear storage device 1.
  • Page 158 Device 6. Rear seat backrest pocket Warning! 7. Coat hook Loose items should be stored in the glove box or other storage Warning! devices to ensure that they are fixed in place. Otherwise, they may cause harm to the passengers in the vehicle during a sudden brake Loose items should be stored in the glove box or other storage or an accident.
  • Page 159 Device Note! Note! Do not hang heavy objects on the coat hooks to avoid damaging Pressing the cup to move the cup holder to the bottom locks the them. cup is not suitable for soft materials (such as paper cups, soft plastic cups).
  • Page 160 Device Rear cup holders After pressing the unlock switch, retract your hand in time to ■ avoid pinch injuries during the automatic ascent of the cup holder. Caution! Do not forcibly put an inappropriate container into the cup ■ holder, otherwise the container or vehicle parts may be damaged.
  • Page 161 Device Opening/closing of glove box When the rear cup holder is not in use, push the cup holder back to lock. Warning! Do not put hot drinks in the cup holder that are not tightly covered to prevent scalding during the moving of the vehicle. Caution! Do not forcibly put an inappropriate container into the cup holder, otherwise the container or vehicle may be damaged.
  • Page 162 Note! If the glove box cannot be opened due to low power of the ■ vehicle, please contact Lotus Customer Care Centre. It is normal for the glove box to open slowly at low temperature. ■...
  • Page 163 Device Rear seat backrest pocket* Pocket under boot floor The rear seat backrest pocket is located in the centre of the rear Additional pocket is provided under the boot floor, which can be seat backrest, and is pushed down to the bottom lock; Press again used to store the charging equipment in the vehicle.
  • Page 164 Device Bonnet storage box The bonnet is equipped with a storage box which can be used to store articles or tools. To Opening of bonnet ( p.73 ), pull up the lock of the bonnet storage box and flip up to open the bonnet storage box. Warning! It is strictly forbidden to use inferior or damaged binding strap, ■...
  • Page 165 Device Coat rack The rear coat rack is mounted on the interior trim panel of the tailgate. You can clamp it onto the spindle at both ends, align the A coat rack is provided behind the rear seat, which can be used to knob with the fixing point of the tailgate, and turn clockwise to lock put clothes, hats and other light items.

  • Page 166: Center Armrest

    Device Distribute your luggage or cargo evenly over the rack, with the ■ The turning angle of the flip plate should not exceed 60°, so as ■ heaviest items at the bottom. not to damage the plate structure. Do not touch heavy or hard objects to the roof to prevent ■...

  • Page 167: Rear Centre Armrest

    Device The front central armrest is equipped with a storage box, and it can Rear centre armrest be opened by pressing the front central armrest switch. Push and close the front centre armrest box cover in the opposite Rear centre armrest direction of opening.
  • Page 168 Device Rear centre armrest* There is a storage box on the rear centre armrest. Opening/closing of rear centre armrest box The armrest box can be opened by pressing the unlocking switch on the side of the armrest box and flipping the armrest box cover The rear centre armrest is provided with a storage box which can be upward.

  • Page 169: Towing Mode

    Device 2. Couple the RV or trailer with the extended towing hook and Towing mode* connect the trailer plug to the socket. The electrical connector is on the towing hook, the connector will be extended out together with the towing hook. This vehicle supports towing a RV or trailer.
  • Page 170 Device Pin No. Colour Function should be paid to the nearby area where the electric tow hook extends to avoid bumping into people or objects when the General grounding White line electric tow hook extends. line Always ensure a smooth start, and avoid sudden acceleration ■...
  • Page 171 Device Type 1: pasted on the surface of the outside mirror. ■ Caution! Type 2: mount a bracket on the frame to clamp. ■ Frequent operation of the electric tow hook will cause the ■ Technical parameter motor to overheat and damage, the use of electric trailer hook expansion or contraction function at room temperature, The towing capacity of the vehicle will depend on the vehicle it is recommended to interval a period of time;...

  • Page 174: Before You Drive

    Drive Correct driving posture Before you drive Whether the driver's sitting posture is correct directly affects the degree of driver fatigue and the driving safety. Driving requirements In order to ensure driving safety, adjustments should be made as follows before driving: Drivers must obtain a driving license before driving on the road.

  • Page 175: Drive

    Drive Wading After wading, it is recommended that you contact the Lotus ■ Before wading, pay attention to the following matters: Customer Care Centre for inspection and maintenance as soon as possible. Confirm the water depth before wading, and make sure the ■...
  • Page 176 10 minutes and then turn on the power Do not operate under the bonnet until the car automatically turns again. If there is still no network signal, please contact the Lotus off the power supply for 3 minutes.

  • Page 177: Start

    Drive If the brake pedal is not depressed to shift, the prompt “Please Note! ■ depress the brake pedal to release the gear lever” will be During the vehicle power off, you hear a sound response, which displayed on instrument cluster. is a normal phenomenon caused by the braking system when it is After the instrument cluster shows that the key fob battery ■...

  • Page 178: Shift Operation

    Drive vehicle can be started by depressing the brake pedal. If the gear is Caution! shifted to D position, the car can be driven away. Switch to gear P/R/D under the following conditions: Note! The speed is less than 3 km/h and it can switch to P gear. ■...
  • Page 179 Drive Park (P) the instrument cluster will display texts accompanied by audible sounds. Drive (D) When the vehicle is parked, press the brake pedal, long toggle the gear lever backwards and release it, and switch gears to D. Note! When the vehicle is engaged into P gear, the brake pedal must ■...

  • Page 180: Ejection Start

    Drive Under the charging state, when all the following conditions are met, Warning! the vehicle will automatically switch to the park (P) gear: Ejection start is recommended in a closed road section. The driver The vehicle speed is below 3km/h and the current gear is not P. ■...

  • Page 181: Acoustic Vehicle Alerting System

    Drive Operation of ejection start Limitations of the ejection start Ejection start can be achieved by following steps: Ejection start can only be used when the ambient temperature is higher than 3℃. The interval between the two ejection starts shall 1.
  • Page 182 Drive Manual control of the active rear spoiler opening or closing The active tail has an anti-clip function, but there is no anti-clip ■ function at the end of about 4mm. Caution! Do not pull the vehicle by the active rear spoiler or push. ■...

  • Page 183: Air Suspension

    Drive When the vehicle is running at a speed below 30km/h, the ■ Air suspension active rear spoiler will automatically return to the manually set position; Convenient loading function When the vehicle is running at a speed of 110~160km/h, the ■...
  • Page 184 Drive Manually adjust the vehicle body height 2. After the loading is completed, press the up button on the side of the boot or close the tailgate. When the vehicle speed exceeds 5 km/h, the air suspension system will automatically rise to the vehicle body height.
  • Page 185 Lotus authorized Range mode: When the driving mode is switched to the range mode, repairer.

  • Page 186: Drive Mode

    Drive Switching the drive mode on the CSD Caution! When the vehicle needs to use the tow hook to tow other vehicles into Towing mode ( p.169 ). The air springs are automatically adjusted to a specific height and load compensation to realize the towing function.
  • Page 187 Drive the vehicle at a lower speed, and utilize air flow to cool the vehicle without forced braking and parking brake. If you want to drive on the track, please consult the Lotus authorized repairer first for more necessary guidance.

  • Page 188: Steering Mode

    Drive The drive modes can be switched by turning the drive mode paddle You can click the icon on the CSD, select the Drive mode , and on the right side of the steering wheel up and down. enter the steering mode setting interface in individual mode, where the haptics and sensitivity of the steering system can be adjusted.

  • Page 189: Active Grille Shutter (Ags)

    Drive To better improve the flexibility of the vehicle, the power ratio of the front and rear axles will be automatically distributed when the vehicle enters or exits a curve, thus achieving more stable and efficient curve driving performance, and guaranteeing the stability of the vehicle to the greatest extent even in severe driving.

  • Page 190: Tyre Pressure Monitoring System

    Lotus the corresponding tyre triggering the alarm will be showed in yellow Customer Care Centre.
  • Page 191 Drive You can open the left front door and check the tyre pressure label real-time tyre pressure value only after the vehicle runs at a on the side of B-pillar to confirm the tyre pressure at different speed of 30 km/h for several minutes. loads and speeds.

  • Page 192: Safe Parking

    ■ so that the vehicle moves forward/backward so that the front Only tyres of the specifications specified by Lotus are allowed to be wheel on the side of the curb gently touches the curb. replaced, otherwise the TPMS may not work normally.

  • Page 193: Auto Hold

    Drive Factors affecting energy recovery efficiency The energy recovery level defaults to third gear each time the vehicle is started. The energy recovery efficiency depends on the following factors: Caution! Current power and temperature of the high-voltage battery. ■ Energy recovery levels. ■...

  • Page 194: Electronic Parking Brake(Epb)

    Drive stopped. When you start driving by depressing the accelerator Electronic parking brake(EPB) pedal, the AUTO HOLD will be automatically released. Enabling/disabling EPB AUTO HOLD setting interface When the ESC and EPB systems are fault-free, you can click icon Electronic parking brake(EPB) switch in CSD to select the Vehicle and enable AUTO HOLD.

  • Page 195: Intelligent Driving System

    EPB is successfully activated. Caution! If the vehicle cannot apply/release the EPB normally, contact the Lotus Customer Care Centre immediately for maintenance. Intelligent driving system Sensor and camera 1. Front camera Sensors of driver assist system and camera 2.
  • Page 196 If the warning message on the instrument cluster does not disappear after the dirt or snow is removed, be sure to park the car in a safe area and contact the Lotus Customer Care Centre. When the road conditions on the left and right sides of the road ■...
  • Page 197 Drive Enabling lidar* In the cold season, do not wash the laser radar at high pressure ■ The lidar can be deployed automatically with the welcome show and for a long time or intentionally flush the installation gap of the highway assist (HWA) activation.
  • Page 198 Drive Cleaning lidar* When the vehicle is powered on and the gear lever is engaged in Park (P) gear, all lidars can be manually deployed with one click as When the vehicle is powered on and the gear lever is engaged in needed.
  • Page 199 Drive Do not attach accessories (such as license plate decorative ■ Note! frames, decals, etc.) to the radars, cameras and their surrounding areas, otherwise the efficient range of the sensors To protect lidar components, do not frequently use the manual ■...

  • Page 200: Adaptive Cruise Control (Acc)

    ■ Adaptive cruise control (ACC) professional equipment and technicians, so you must contact the Lotus Customer Care Centre for relevant operations. The ACC can keep your vehicle running at a speed within ACC may fail to recognize animals, pedestrians, specially- 0~150km/h, and control the speed of your vehicle according to ■...
  • Page 201 Drive The selection of a target may be delayed or interfered Note! ■ with when driving into and out of curves. ACC may brake When ACC fails, the icon is shown in grey to remind the driver unexpectedly or brake too late. ■...
  • Page 202 Drive The following distance infers the time required for the subject During cruising, as the distance between your car and the vehicle vehicle to run at the current speed to the current position of the ahead changes, the instrument cluster will display the different vehicle ahead.
  • Page 203 Drive Activate ACC When the vehicle is running, you can activate the ACC in the following steps: 1. Scroll the left multi-function button leftwards to switch to ACC, at this time the icon is displayed in white, and ACC enters ready mode.
  • Page 204 Drive 1. Left multi-function button Warning! 2. Following distance button Always keep your car at a safe distance from other vehicles. If the When ACC is activated, the driver can set different target speed and following distance is close, personal injury or vehicle damage may following distance as required: occur in the event of a traffic accident.
  • Page 205 Drive The driver unfastens the seat belt. change lanes until the lane change is completed or the left direction ■ indicator lamp is turned off. The wheels lose grip. ■ System failure (such as camera, radar, braking, steering, etc.) When using the overtaking assist function, the following conditions ■...

  • Page 206: Highway Assist (Hwa)

    Drive may be difficult to maintain the correct following distance from the may accelerate to the set target speed. At this point, you must vehicle ahead. actively depress the brake pedal to brake and slow down your car. Change the target vehicle Highway assist (HWA)* When the adaptive cruise control (ACC) controls the subject vehicle The highway assist (HWA) can actively control the speed of the...
  • Page 207 Drive After the instrument cluster prompts the HWA to exit, refer to the When driving downhill on steep slopes, it may be difficult for ■ Recovery HWA ( p.210 ) and flick up the left multi-function button HWA to maintain proper distance from the vehicle ahead. In to restore the HWA.
  • Page 208 Drive due to the limited field of view of the mid-range radar, in which case, the car may be accelerated unexpectedly, which requires the driver to respond appropriately according to the actual situation. HWA may identify road edges (walls, guardrails, curbs, grass, ■...
  • Page 209 Drive Turn on HWA When HWA is not activated, a targeted car appears ahead. The current car is too close to the targeted car it follows. The current car is too close to the targeted car it follows. Left multi-function button When HWA is activated, a targeted car appears 1.
  • Page 210 Drive Disable HWA The ESP is deactivated or malfunctioning. ■ The driver takes the initiative to take over the steering wheel, ■ and the steering force reaches a certain level. System failure (such as camera, radar, braking, steering, etc.) ■ Warning! After HWA is deactivated, you must take over control of your car to ensure the driving safety.

  • Page 211: Forward Drive Assist

    Drive Limitations of HWA braking measure at all, the system will take measures to assist the driver to avoid or reduce collisions. HWA may not work properly when any of the following conditions or The following conditions must be met for AEB to function: road environments occur: Roads with invisible lane lines.
  • Page 212 Drive FCW: when the vehicle speed is within 4~150km/h, if the system ■ AEB cannot be used properly in all driving, traffic, weather or ■ determines that there is a potential risk of collision, it will alert road conditions. the driver of the potential collision risk through the alarm sound For effective targets identified by the system, depending on ■...
  • Page 213 Drive Detect objects Note! If ACC, HWA or Lotus Hyper Pilot-Highway Navigation Pilot are not enabled, the instrument cluster will not display the vehicle model but only indicates its colour in the middle of the upper edge. The FCW warns the driver with audible and visual signals when the subject vehicle is about to collide with another vehicle or pedestrian ahead.
  • Page 214 Drive Warning! Note! You must maintain an appropriate speed and a safe distance, and The AEB will begin with a self-check when the vehicle is started, and take braking measures in time if necessary. during self-check, AEB will not work. Setting AEB Limitations of AEB AEB may not work well in the following situations, and it is...

  • Page 215: Evasive Steering Support (Ess)

    Drive Driver having strong initiative: driver actively ■ Note! manoeuvres/brakes the vehicle, the system may not react or react later than expected. ESS will work only when the vehicle is running at a speed of The road surface is uneven. 50~120km/h.

  • Page 216: Front Cross Traffic Alert (Fcta)

    Drive Lane keep assist(LKA). ■ Front cross traffic alert (FCTA) Limitations of ESS Objects that ESS can detect include pedestrians, two-wheelers, vehicles (coaches, trucks, passenger cars). ESS may not work properly when any of the following conditions or road environments occur: Uneven road.
  • Page 217 FCTA is turned off, the indicator on the instrument cluster is illuminated in yellow. When the ACC, HWA or Lotus Hyper Pilot-Highway Navigation Pilot are not enabled, the instrument cluster will not display the vehicle...

  • Page 218: Lane Keep Assist(Lka)

    Drive Limitations of FCTA Lane keep assist(LKA) When the car exits the parking space, radars on both sides may be blocked by surrounding cars and obstacles. In this case, FCTA will LKA attempts to keep the vehicle in its own lane when the vehicle not be able to detect the front crossing cars in a timely manner.
  • Page 219 Drive the instrument cluster. At the same time, the takeover prompt tone Note! is sounded, and LKA will exit when the alarm is ignored. Please hold the steering wheel correctly to avoid triggering the When the vehicle deviates from its own lane again, LKA will be release alarm by mistake.
  • Page 220 Drive is a risk of deviation, the system will provide steering force to the Collision with a pedestrian in the adjacent lane due to an ■ steering wheel to bring the car back into its own lane. When the car unintentional departure from the lane.
  • Page 221 Drive Setting LKA 1. LKA status indicator 2. Lane lines Setting LDW No lane line is displayed if it is not detected by LKA. Click the icon on CSD and select Safety to enter LKA setting interface where the lane keep assist can be set. When the LKA fails, the indicator on the instrument cluster is illuminated in yellow, the LKA switch on the central display is gray...

  • Page 222: Traffic Sign Identification (Tsi)

    Drive The lane lines are not clear. ■ Note! The speed of the car is not within the working range. ■ The driver actively steers. Generally, maps are automatically updated monthly via OTA ■ ■ updates. System failure (such as camera, radar, braking, steering, etc.) ■...
  • Page 223 Drive Speed limit information identification When the TSI fails, the indicator on the instrument cluster is illuminated in yellow, the TSI switch on the central display is gray and cannot be operated. Note! If the speed limit sign is not clear or is twisted, inclined, ■...
  • Page 224 Drive You can click the icon on CSD as needed, and select Safety to TSI can automatically position the vehicle and automatically ■ enter the automatic speed limit alarm setting interface where you detect the country where the vehicle is located, but the driver can set the speed limit alarm mode.

  • Page 225: Rear Drive Assist

    Drive detected, and the target speed currently set by ACC/HWA is higher hazard warning lights to turn on, alerting the driver of the vehicle than the speed limit, the system will automatically adjust the target behind to brake. speed to the speed limit value; if the target speed is lower than the Note! speed limit, no change will be made.
  • Page 226 Any of the vehicle doors (including the bonnet and the tailgate) ■ rear of your car turns red. is not closed. Note! If the ACC, HWA or Lotus Hyper Pilot-Highway Navigation Pilot are not enabled, the instrument cluster will not display the vehicle...

  • Page 227: Blind Spot Detection (Bsd)

    Drive Setting RCW Adverse weather such as snow, fog, etc. that affects the system ■ and prevents the target from being detected. The target vehicle approaches after changing lanes from ■ another one. System failure (such as camera, radar, braking, steering, etc.) ■...
  • Page 228 Drive Setting BSD Note! If ACC, HWA or Lotus Hyper Pilot-Highway Navigation Pilot are not enabled, the instrument cluster will not display the vehicle model. BSD works when the car is driving at a speed within 15~150km/h. When BSD is working, the BSD indicator on the outside mirror will be illuminated or flash, accompanied by an audible alarm, and a visual alarm signal will pop up on the instrument cluster.

  • Page 229: Rear Cross Traffic Alert (Rcta)

    Rear cross traffic alert (RCTA) Visual alarm signal Note! If the ACC, HWA or Lotus Hyper Pilot-Highway Navigation Pilot ■ are not enabled, the instrument cluster will not display the vehicle model but only a visual alarm on the left or right side of the lower edge.
  • Page 230 Drive When braking is triggered by the RCTA, the braking force will Warning! ■ last for 2S after the triggering, and the user should take over To ensure safe reversing, you have to look around and make sure the vehicle in time to avoid a collision. your surroundings are safe before reversing.

  • Page 231: Door Open Warning (Dow)

    Drive Limitations of RCTA Door open warning (DOW) When the car reverses from the parking space or the garage, radars on both sides may be blocked by surrounding cars and obstacles. In When the car is stationary or driving at a low speed, the DOW this case, RCTA may fail to detect the rear crossing cars in a timely system detects the moving targets approaching from behind and manner.

  • Page 232: Brake Assist System

    Drive Setting DOW The target is small or moving slowly or stationary. ■ On sharp turns, downhill roads, quite narrow or wide lanes. ■ System failure (such as camera, radar, braking, steering, etc.) ■ Brake assist system Electronic stability control (ESC) The electronic stability control (ESC) can improve driving stability and safety by intervening the driving torque output or applying braking force to wheel ends when the vehicle is unstable.
  • Page 233 Drive Setting ESC Note! If the car gets stuck in snow, sand or other conditions, deactivating ESC can help the car get grip and traction. At this time, the indicator on the instrument cluster will be illuminated. Anti-lock Braking System (ABS) ABS can prevent the wheels from locking up when the driver is applying the maximum braking force.

  • Page 234: Traction Control System (Tcs)

    Drive braking force between front and rear wheels and controlling the slip When the car is starting on a split road with one side slippery, the of rear wheels. ESC indicator on the instrument cluster will flash if any of the wheels slips.
  • Page 235 Drive Warning! Warning! If the HDC is working continuously while the car is running downhill The driver should maintain attention and judgement at all times to on a long slope, the temperature of the brake discs may be too high, ensure the driving safety and take over the car when necessary.

  • Page 236: Brake Assist System (Bas)

    The BAS will not work when the ESC fault indicator remains on, in (R) position and the Electronic Parking Brake (EPB) is deactivated. such a case please contact the Lotus Customer Care Centre in time. Warning! Anti roll-over program (ARP) HSA is not a substitute for the Electronic parking brake(EPB).

  • Page 237: Lotus Intelligent Dynamic Control (Lidc)

    When driving at medium or low speeds. ■ When the vehicle is reversing at low speeds. When a fault alarm related to the lotus intelligent anti-roll control ■ system is displayed on the instrument cluster, you are not allowed When the vehicle is running at high speed, the LIDC can keep the to drive on rough roads and turn at low speed.

  • Page 238: Electrical Pad Wear Indication (Epwi)

    It is recommended that you regularly drive your vehicle to ■ a Lotus authorized repairer for inspection or replacement of The rear friction Rear brake pad pad alarm is short alarm failure, please friction pads and brake discs. If you encounter any problem...

  • Page 239: Post Impact Control (Pic)

    Park assist system force is applied. In such case, the car can still run normally because its braking performance is not affected. If you want to further confirm the status of your car, please contact the Lotus Parking assist (PA) authorized repairer.
  • Page 240 Drive The car is powered on. ■ Open ground locks, low stone piers, cylinders, thin rods, sharp ■ The gear is not in P. ■ objects, potholes in the ground, etc. PAF and PAR are turned on. ■ Height-limited doors, rods or suspended structures. ■...

  • Page 241: Visual Parking Assist (Vpa)

    Drive The sun shines obliquely or directly on the camera. ■ Visual parking assist (VPA) Under bad weather such as rain, snow, fog, and haze. ■ VPA captures the vehicle surroundings through a park assist Note! cameras and displays the detected information on the CSD to provide the driver with a panoramic view of the vehicle.
  • Page 242 Drive View switching 1. Trajectory lines 2. Warning volume 1. Panoramic image view 2. Automatic parking view The trajectory/guide lines on the CSD simulate the projection of the vehicle on the ground. With the guide lines, the driver can view 3.

  • Page 243: Automatic Parking Assist (Apa)

    Drive Check whether there are pedestrians, children, animals, and ■ Automatic parking assist (APA)* other thin, pointed, low, suspended obstacles (e.g., ground locks, low stone piers, road cones, thin poles, sharp objects, wall The APA can identify the surrounding environment, automatically corners, square columns and corners of parking lot) that may search for parking spaces around the car, and prompt the driver affect the detection of the ultrasonic sensors around the vehicle.
  • Page 244 Drive 3. If an available parking space is found, depress the brake pedal During the automatic parking, the vehicle can be overridden by any to stop the car stably and click the IN CAR button. of the following ways: Active shifting. ■...
  • Page 245 Drive 4. Follow the instructions to release the brake pedal and steering wheel, and start to automatically drive into the parking space. Warning! Always observe your surroundings follow APA's ■ 5. When the automatic parking is complete, the CSD will show that instructions.
  • Page 246 Drive After the automatic park-in is completed, the driver may need The road surface is uneven or has steps; In this condition, do not ■ ■ to adjust the vehicle' position further to ensure proper parking. use APA. APA is only available on flat roads. If improper parking is performed on roads with curbs made of ■...

  • Page 247: Remote Parking Assist (Rpa)

    Drive Using the features of RPA requires the mobile phone to be Under strong sunlight or in the shadow of mottled trees. ■ bluetooth enabled and in range of connection. Remote parking will The ground is reflective or has accumulated water. ■...
  • Page 248 Drive 3. When an available parking space is detected, depress the brake 4. Open the mobile APP outside the vehicle, select More pedal to stop the car stably. The driver can get out of the car Applications , and clik the Remote Parking button. with valid key and phone carried after clicking the REMOTE PARKING button and hanging into P gear.

  • Page 249: Driver Performance Support

    Drive Limitations of APA 5. By holding the Long press to park button, the vehicle will be driven into the parking space automatically. After the park-in RPA is an extension of APA and has the same limitations as those of is completed, the vehicle will be powered off automatically and APA( p.243 ).
  • Page 250 Drive becomes conscious. A card prompt pops up on the CSD to alert the Note! driver and ensure safe driving. According to the driver's actual status, the driver performance ■ support system activates the fatigue alarm when the driver's eyes are closed for a period of time. When the driver does not look ahead for a long period of time, ■...
  • Page 251 ■ direct vision and the driver monitoring system works properly. and take breath-test again. After this, if the restriction still cannot be released, contact the authorised Lotus repairer in a Limitations of driver monitoring system timely manner. Driver performance support may not work properly in the following...
  • Page 252 Drive Stay awake during driving and do not drive after drinking ■ alcohol or taking medicines, otherwise, it will impair your control ability over the vehicle and thereby cause an accident.

  • Page 255: Lotus Hyper Os

    Slide left If you notice any faults with the CSD itself, be sure to contact ■ Lotus Customer Care Centre in a timely manner. Note! Slide right Do not operate the display using sharp objects, as this will cause...
  • Page 256 LOTUS HYPER OS Slide up and down Zoom out with two fingers Zoom in with two fingers After locking the vehicle for a period of time, you can unlock it ■ again to restart the CSD. Press and hold Note!

  • Page 257: Central Screen Display

    LOTUS HYPER OS Central screen display Boot guide Phone connection Use the mobile APP to scan the two-dimensional code in the central display screen to complete the login and agree to the user agreement. After successful login, complete the boot.

  • Page 258: Desktop

    LOTUS HYPER OS 3. Time Desktop 4. Network 5. Temperature and air quality 6. Bluetooth 7. Notification center 8. Multifunctional panel 9. Information cards 10. Mini player 11. Air conditioning 12. App Center 13. Set up 14. Garage 1. User Centre 15.

  • Page 259: Garage

    LOTUS HYPER OS Garage 1. Central lock 2. Panoramic canopy adjustment switch 3. Integrated charging port cover switch 4. Active rear wing switch 5. Tailgate switch...

  • Page 260: Vehicle Use Preference Function

    LOTUS HYPER OS Caution! Vehicle use preference function Do not obstruct the automatic adjustment of the seat, otherwise the seat may be damaged. Note! During the automatic adjustment of the seat, if the seat position is manually adjusted, the automatic adjustment of seat will be stopped.
  • Page 261 LOTUS HYPER OS Devices on the mobile phone or other devices. Click Connect, and Click the icon in the upper right corner of the CSD to open the the vehicle hotspot setting is successful. Wi-Fi setting interface. Enable the Wi-Fi network and activate the...

  • Page 262: Bluetooth Settings

    LOTUS HYPER OS Warning! Bluetooth settings Do not operate your phone in hazardous areas such as fuel storage areas and chemical stations. Apple CarPlay Apple CarPlay can be connected by means of wireless or wired connection to enjoy smartphone features such as music, navigation,...
  • Page 263 LOTUS HYPER OS 3. After Apple CarPlay is connected, there will be an icon in the Note! upper left corner of the CSD, and the icon in the device list will light up. You can click the icon in the device list for quick connection after the first successful connection.
  • Page 264 LOTUS HYPER OS Wired connection Disconnection Connect the iPhone to the TYPE-C data transmission interface in Click the icon in the device list on the CSD to disconnect Apple the front armrest box via a data cable, and click Confirm on the CarPlay.

  • Page 265: System Application

    LOTUS HYPER OS After Apple CarPlay is connected, you can only connect another Click the icon in the upper left corner of the CSD to expand/ ■ ■ device's Bluetooth media. collapse Apple CarPlay. Click the icon on the CSD, and select Apple CarPlay to turn it ■...

  • Page 266: Multimedia

    LOTUS HYPER OS Sort: Press the App icon long enough to drag and sort; 3. Bluetooth playback ■ Update: If the App has a new version, click the update button on ■ 4. Online multimedia the icon to update the App.
  • Page 267 LOTUS HYPER OS When you make a call, the information and operation of the call are displayed on the left side of the central display. Warning! Do not use mobile phones in areas of high explosion risk. ■ Otherwise, sparks may generate, which could cause a fire or explosion.

  • Page 268: Navigation

    LOTUS HYPER OS Overview of navigation interface 1. Right multifunction button left button 2. Right multifunction button middle key 1. Springboard: Gives different possibilities to set or search for a 3. Right multifunction button right button destination. Navigation 2. Search icon: opens the springboard.
  • Page 269 LOTUS HYPER OS Route planning 6. Lotus: Shows you nearby Lotus Dealerships or Service Station. While planning a route, the navigation system will provide information about the estimated time of arrival, total distance and the remaining battery level after reaching the destination. You will also get the possibility to choose alternative routes.
  • Page 270 The EV routing algorithm takes the in-app preferences set by the user and central parameters set by Lotus into consideration. EV routing updates the range on map every time the user opens the view. Range on route is updated automatically when conditions change and on regular intervals.
  • Page 271 LOTUS HYPER OS During navigation, information such as turning information, estimated time of arrival, remaining time, remaining distance and traffic condition information will be displayed. When you arrive at your destination, the navigation system will give you the option to search for parking places nearby.
  • Page 272 LOTUS HYPER OS Navigation setting Automatic offline map update: Offline map data is automatically updated when the Internet is connected, keeping offline data up-to- Click the Settings icon to enter the map setting interface. date. Modify Routing preferences, e.g. Auto-Add charging stations or ■...

  • Page 273: Set Up

    LOTUS HYPER OS Lights Set up Vehicle This interface allows you to set up external ,internal lighting. Internal light: on this surface, the on/off, colour and brightness of the ambinet lamps can be adjusted. This screen allows you to set door lock, sunroof transparency, drive External light: adaptive light switch, tourist mode.
  • Page 274 LOTUS HYPER OS Drive mode Safety In this interface, the ride height and driving mode of the vehicle This interface allows you to set drive assist, active safety, and can be set, track mode (only R+ models have this mode), individual occupant safety.
  • Page 275 LOTUS HYPER OS Sound Display On this interface, you can set the sound focus, sound mode, sound On this interface, you can turn off the CSD, cleaning mode, auto flip, optimization and other functions. brightness and HUD.
  • Page 276 Privacy Scan the QR code to log in to your account. After entering the user This interface allows you to view the Lotus privacy policy, Data interface, you can switch or log out the account, and manage and set sharing, vehicle locator, voice data and face data.

  • Page 277: Ota System Upgrade Operation

    LOTUS HYPER OS System After entering the OTA upgrade interface, you need to read and agree to the Software Remote Update Service Terms . After you This interface allows you to set language, notifications and services, agree, you can select SCHEDULE or UPDATE NOW .
  • Page 278 LOTUS HYPER OS Interface now Appointment upgrade After selecting Upgrade Now, the countdown prompt box will be OTA system upgrade can be scheduled at any time within 24 hours. displayed on the CSD. You can wait for the countdown to end After setting, the reservation upgrade icon will be displayed at the and start the automatic upgrade;...
  • Page 279 LOTUS HYPER OS After starting the upgrade, the system will detect the upgrade The system upgrade is officially started. According to the version preconditions. If the verification fails, you need to confirm the failed size, the system upgrade process is expected to last about 10-30 items by yourself.

  • Page 280: Rear Display

    P gear, otherwise it may cause upgrade failure, or even personal injury or death. Note! If the OTA system upgrade fails, the Lotus Customer Care Centre should be contacted immediately. 1. Time 2. The rear display is up and down...
  • Page 281 LOTUS HYPER OS 3. Volume settings 4. Air conditioning 5. Set up 6. Multimedia 7. Close the screen Warning! The rear display has an anti-clip function when it is put away. ■ However, to ensure safety, do not put your hands or other objects under the rear display to avoid clamping your hands or damaging the rear display.

  • Page 284: Necessity Of Maintenance

    It will be necessary to adhere to the routine warning lamps for proper operation. Check if any indicator maintenance schedule as outlined by Lotus Cars in this document. lamps on the instrument cluster come on abnormally. The routine maintenance outlined in this document will require Check seat belts and parking brake for proper operation.

  • Page 285: Scheduled Maintenance

    To maintain warranty validation and help ensure proper safety, I: check; correct, clean, add, adjust, transpose, lubricate or replace as necessary performance and dependability of the vehicle, Lotus Cars requires R: replace that the vehicle be serviced in accordance with latest version of the maintenance schedule.

  • Page 286: Warranty Coverage

    Content period If the vehicle is stored for a long time, it is recommended that you 96 months or go to the Lotus authorized repairer for a comprehensive inspection HV battery, electric 200,000 km (which and maintenance before use. drive systems...
  • Page 287 Maintenance Vehicle warranty Customer's own expense replacement parts warranty Limited warranty Limited warranty Classify Content Classify Content period period Tyre (Tyre warranty 6 months or 10,000 12 months or 16,000 is covered by the km (which ever Brake pads km (which ever tyre manufacturer) comes first) comes first)

  • Page 288: Change Of Ownership

    These repairs will be free of Normal wear, tear and deterioration (e.g., discolouration, fading, ■ charge for the customer if they are carried out by Lotus authorized deformation, blurring, etc.) of components which are not repairers.

  • Page 289: Record Of Ownership Change

    Maintenance Change log 1 Record of ownership change Stamp Change log 1 Change log 2 Address of Address of current user original user Address of Address of current user original user ID number ID number ID number ID number Postal code Postal code Postal code Postal code...
  • Page 290 Maintenance Change log 2 Change log 3 License plate ownership number change Stamp License plate number Stamp Change log 3 Address of Address of current user original user Change log 4 ID number ID number Address of Address of current user original user Postal code Postal code...

  • Page 291: Service Record

    Maintenance Change log 4 1st maintenance （2 years or 30,000 km）(which ever comes first) Mileage at the time of Signature (seal) Date of change ownership change License plate number 2nd maintenance （4 years or 60,000 km）(which ever comes first) Stamp Job card number Service record Mileage...
  • Page 292 Maintenance 3rd maintenance （6 years or 90,000 km）(which ever comes 4th maintenance （8 years or 120,000 km）(which ever comes first) first) Job card number Next maintenance mileage Mileage Signature (seal) Date Description 5th maintenance （10 years or 150,000 km）(which ever comes Next maintenance date first) Next maintenance mileage...
  • Page 293 Maintenance 6th maintenance （12 years or 180,000 km）(which ever comes 7th maintenance （14 years or 210,000 km）(which ever comes first) first) Next maintenance date Job card number Next maintenance mileage Mileage Signature (seal) Date Description 8th maintenance （16 years or 240,000 km）(which ever comes Next maintenance date first) Next maintenance mileage...

  • Page 294: Storage And Maintenance

    Maintenance 9th maintenance （18 years or 270,000 km）(which ever comes 10th maintenance （20 years or 300,000 km）(which ever comes first) first) Next maintenance date Job card number Next maintenance mileage Mileage Signature (seal) Date Description Storage and maintenance Next maintenance date In order to maintain the good performance of the vehicle, please Next maintenance mileage avoid exposing the vehicle to too high or too low temperature...

  • Page 295: Battery

    In case of any questions, please contact Lotus Customer Care Centre. Note! When the vehicle is parked for a long time, be sure to check and ■...
  • Page 296 If you notice the following, be sure to stop using the vehicle and near the battery. cut off the power immediately. You can also contact the Lotus authorized repairer for further guidance: The battery shall be kept out of reach of children.

  • Page 297: Check Tyre

    Slow down immediately. Stop and check for tyre damage. If no damage can be seen from the appearance, please continue driving at a low speed and go to a Lotus authorised repairer for inspection. Check tyre...

  • Page 298: Seasonal Tyre

    In the temperature below 7℃ environment, the performance of the the road, thereby reducing the risk of side-slip. When using tyre summer tires will be reduced, in this case, Lotus Cars recommended chains, pay attention to the following: that the vehicle replace the winter tires.

  • Page 299: Check The Front Cabin

    Lotus Customer contact the Lotus Customer Care Centre immediately. Care Centre. When the vehicle is driven go to a Lotus authorised repairer for Warning! maintenance at the specified interval, the technicians of the Lotus...

  • Page 300: Brake Fluid

    MIN and MAX marks. Warning! If the brake fluid level is lower than the recommended level, stop driving as soon as safety allows and contact the Lotus Customer If you notice the brake pedal becoming loose or significant loss of Care Centre.

  • Page 301: Windscreen Washer Fluid

    Maintenance Filling windshield washer fluid skin or eyes, wash immediately with plenty of water and go to the doctor right away. Caution! Brake fluid can damage the paint surface. The spill can be ■ immediately absorbed with an absorbent cloth and the affected area must be cleaned with a car cleaner product mixed with water.

  • Page 302: Air Filter

    A/C system. Regular replacement of air filter element is part of maintenance. When you drive your car to a Lotus authorised repairer for scheduled maintenance, the staff of Lotus authorised repairer will check or replace the A/C filter element according to the maintenance interval and the actual situation.
  • Page 303 Regularly clean the edge of the wiper blade and check for cracks, wiper arm will rest on the windscreen. At this time, you can lift rips and roughness in the rubber. If damaged, please contact Lotus the wiper arm and adjust the wiper blade to a certain angle until Customer Care Centre for replacement.

  • Page 304: Exterior Maintenance

    Maintenance avoid freezing which may hinder the door handle from unfolding In winter or cold weather, check whether the wiper blade are ■ electrically. frozen on the windscreen before using the wipers. If de-icing is To prevent damage to vehicle paint, you should remove corrosive not conducted in advance, the wiper blade and wiper motor may substances (bird droppings, resin, insects, asphalt spots, road salt, be damaged.
  • Page 305 Maintenance Automatic washing Warning! Automatic washer is convenient and efficient, but it cannot wash the Do not wash the inside of the bonnet with water, otherwise an vehicle thoroughly. To get the more washing effect, we recommend electrical fault may occur and cause a serious accident. you wash the vehicle manually.
  • Page 306 Maintenance Polishing and waxing Caution! High-quality wax can protect vehicle paint against environmental Do not wash the sensors with high-pressure washer or steam damages and even minor scratches. In case that the water droplets ■ washer, otherwise they may be damaged. Wash all sensor can no longer smoothly fall from the painted surface of clean vehicle surfaces with a small flow of water for a short time and keep body, you should immediately apply a layer of high-quality hard wax...

  • Page 307: Interior Maintenance

    Interior maintenance When you maintain the leather materials in the car, please use the leather special care products recommended by Lotus for cleaning/ Use Lotus-recommended cleaners and vehicle maintenance maintenance. products as much as possible. Regularly clean the vehicle inside Note! with a vacuum cleaner.
  • Page 308 In order to maintain the appearance of this material, please Do not use bleach, dyes or chemical solvents to clean seat belts. use Alcantara special care products recommended by Lotus for These materials can seriously impair the fabric performance of seat cleaning/curing.

  • Page 309: Precautions During The Run-In Period

    ■ The dust, dirt and grease on your fingers can affect the performance the car for inspection, and contact Lotus Customer Care Centre and clarity of the CSD. Clean the display frequently with microfibre for the problem that you cannot solve by yourself.

  • Page 312: Guidance For Traffic Accidents

    E-Call is always available in applicable countries. ■ Lotus SOS is part of the Lotus customized services and is ■ activated as a default function during a certain period. Lotus...
  • Page 313 Emergency Red LED on indicates: Call exception/ unavailable/ DTC fault. ■ LED OFF indicates: emergency call system standby/sleep/off. ■ When the SOS button is pressed, an emergency call interface will appear on CSD. When any of the vehicle's airbags or seat belt pretensioners are activated, the road rescue system automatically activates and sends a signal to the call center.

  • Page 314: Hazard Warning Device

    When there is an owner transfer and the car is sold and used in ■ another country, please visit the local Lotus authorised repairer to set up the proper Lotus SOS service in order for the new owner to receive the support accordingly. In case of emergency during driving, please press the hazard The system only operates in areas with a compatible cell phone ■...

  • Page 315: Warning Triangle

    Emergency The reflective vest is stored in the glove box. If you make an Note! emergency stop on the road, please be sure to wear a reflective vest when getting out of the car.Wearing a reflective vest increases The hazard warning lights may also be automatically activated by visibility and reduces the risk of accidents.

  • Page 316: Vehicle Lifting

    Emergency Safety sign information Vehicle lifting The vehicle must be fixed or lifted at the specified lifting points, as the high voltage battery pack is installed at the bottom of this vehicle. Failure to do so may cause damage to the battery pack, resulting in accidents.

  • Page 317: Jump Starting

    Emergency Caution! Since this vehicle is equipped with air suspension, be sure to ■ switch to jack mode before lifting to avoid damages to the vehicle. The vehicle must be lifted at the specified lifting point by using ■ the jack. Otherwise damages to the vehicle may be caused. Jump starting When the vehicle doors cannot be unlocked due to weak battery, 3.
  • Page 318 Unable to jump start for lead-acid batteries. ■ If you encounter any problems during jump starting, contact ■ Lotus Customer Care Centre in time. Note! The vehicle shall be started for at least 20 minutes to ensure that the battery is charged to the working voltage.
  • Page 319 Emergency battery. Check whether the car with dead battery can start 3. Connect the other end of the red cable to the positive (+) normally. terminal of the battery in booster car. 7. After the car with dead battery starts normally, disconnect 4.

  • Page 320: Replace Fuse

    Emergency Replace fuse Bonnet fuse box Fuse information Function Ampere (A) EF01 Cooling fan (ALPHA) 40 Open the bonnet to identify the cabin fuse box. EF02 Cooling fan (LAMBDA) EF03-A Body area controller 10 EF03-A Electronic gear shifter assembly EF03-A Redundant brake controller EF03-A...
  • Page 321 Emergency Fuse information Fuse information Function Ampere (A) Function Ampere (A) EF03-A Electric power EF09 Autopilot assist steering domain controller EF03-A Brake controller EF09 Outlet media rearview mirror controller EF03-B 48V supercapacitor EF10 Front active EF03-B Medium voltage stabilizer bar assy converter module EF10 Rear active stabilizer...
  • Page 322 Emergency Fuse information Fuse information Function Ampere (A) Function Ampere (A) EF16 High voltage EF26 CPSR control charging system assy EF27 Redundant brake controller EF17 Washing pump EF28 High voltage battery 10 EF18-A Spare battery sounding device EF29 Vehicle controller EF18-B Electronic gear EF30...
  • Page 323 Emergency Fuse information Fuse information Function Ampere (A) Function Ampere (A) EF35 Vehicle controller EF43-A Rear electric drive system motor EF36 Vehicle controller EF43-A Front electric drive system motor EF37 Vehicle controller EF43-A Motor loop coolant EF38 Front left radar diverting valve EF38 Front right radar...
  • Page 324 Emergency Central fuse box Fuse information Function Ampere (A) EF43-B Condenser inlet solenoid on-off valve EF43-B Turn off valve actuator EF43-B OHX shutoff valve EF43-B Condenser electric expansion valve EF43-B Electric evaporator The central fuse box is located on the right side of the tunnel expansion valve console, which can be viewed by removing the right front bezel of the tunnel console.
  • Page 325 Emergency Fuse information Fuse information Function Ampere (A) Function Ampere (A) CF01 Wiper motor CF06–B Skylight dimming motor controller CF02 Reserve CF07 Autopilot position unit CF03 Reserve CF08 Anion generator CF04 Left monitor streaming media outside rearview CF08 PM2.5 sensor mirror screen CF09 Combination switch...
  • Page 326 Emergency Fuse information Fuse information Function Ampere (A) Function Ampere (A) CF18 Driver side door CF25 Reserve module backup power supply CF26 Front active stabilizer bar assy CF18 Bluetooth and NFC key communication CF26 Rear active stabilizer module standby bar assy power supply CF27 Heads-up display...
  • Page 327 Emergency Fuse information Fuse information Function Ampere (A) Function Ampere (A) CF29 Right rear electric CF34–B Diagnostic module door module (ALPHA) CF35–A Radar module in front of car CF29 Right front door (presence detection anti-collision radar of children) module (ALPHA) CF35–A Rear rear radar CF29...
  • Page 328 Emergency Fuse information Fuse information Function Ampere (A) Function Ampere (A) CF37–A NFC card reader CF46–B Overhead light module CF37–A Bluetooth and NFC key communication CF47 WPC (50W) module CF49 Front blower CF37–B Vehicle gateway module CF50 Reserve CF38 Air conditioning CF51 Central display controller...
  • Page 329 Emergency Rear electric fuse box Fuse information Function Ampere (A) RF01 Reserve RF02 Reserve RF03 Left rear taillight (LAMBDA) RF04 Right rear taillight (LAMBDA) RF05 Through-tail light (LAMBDA) Remove the boot storage box to find the rear electric fuse box. RF06 Reserve RF07...
  • Page 330 Emergency Fuse information Fuse information Function Ampere (A) Function Ampere (A) RF14 Medium voltage RF23 Reserve converter module RF24 Active tail motor RF14 48V supercapacitor (AWM) RF15 Rear electric drive RF25 Rear tail light system motor (IEM) RF26 Rear electric drive RF16 Rear entertainment system motor...
  • Page 331 Emergency Rear main distribution fuse box Fuse information Function Ampere (A) 48V DCDC Rear-wheel steering 80 Trunk safety box Cabin fuse box Instrument fuse box Cabin fuse box Reserve Remove the boot storage box to find the rear main distribution fuse RM01 Rear electric drive box.
  • Page 332 Emergency Fuse information Fuse information Function Ampere (A) Function Ampere (A) RM08 Right rear door RM17 Autopilot assist module domain controller RM09 Driver's seat inner RM18 Reserve connection RM19 Autopilot assist RM10 Inside passenger domain controller seat connection RM20 Autopilot assist RM11 Rear electric drive domain controller...

  • Page 333: Driver's Tools

    Emergency Fuse information Fuse information Function Ampere (A) Function Ampere (A) RM31 Front Lidar box RM41 Right lidar RM31 Rear Lidar box RM41 Rear lidar RM32 Left lidar box RM42 Reserve RM32 Right lidar box Driver’s tools RM33 Reserve RM34 Left front The driver’s tools are placed in the boot load storage box, which combination...

  • Page 334: Quick Tyre Repair

    Emergency 2. Tyre repair liquid tank connection Quick tyre repair 3. Tyre repair liquid tank switch 4. Electric inflater pump hose Tyre repair kit 5. Electric inflater pump connection The tyre repair kit can be used to temporarily seal punctures. 6.
  • Page 335 Emergency 6. Refit the valve dust cover. 6. Press the electric inflater pump switch button. 7. Inflate the tyre to the pressure recommended on tyre pressure Quick tyre repair label. 1. Tear off the maximum allowable speed sticker (affixed to one 8.
  • Page 336 ■ pressure recommended on tyre pressure label. If the tyre kilometers, and go to the Lotus authorized repairer as soon as pressure is too high, use a bleed valve to permit air to be possible to repair or replace the tires.

  • Page 337: Towing Vehicle

    The vehicle may be damaged if it is vehicle. towed by incorrect towing methods or improper towing equipment. Warning! Lotus cars recommends that you seek help from professional roadside assistance personnel for towing. When the vehicle is towed to a platform trailer, no person or ■...
  • Page 338 Emergency After the vehicle is towed to a platform trailer, please deactivate ■ the towing mode and apply the electronic parking brake (EPB) to ensure the parking safety of the vehicle. When the vehicle is being towed, the driver and passengers ■...
  • Page 339 Emergency 5. Before towing, please power off the vehicle, turn on the hazard long-distance transportation is required, please tow the vehicle warning lights, and ensure that the vehicle is locked completely onto a flatbed trailer. with no one inside. Note! 6.

  • Page 340: Emergency Rescue Procedures

    Emergency Wear 1,000 V insulating gloves when touching high-voltage ■ Warning! components. Use insulating tools when operating high-voltage components. When the vehicle is driven out of a pit by moving back and forth, ■ ■ Prepare insulating protective hooks. it may suddenly rush forwards or backward. During this process, ■...
  • Page 341 Emergency Fire extinguisher Insulating tape Fire blanket Insulating tools Note! High-voltage insulating gloves The insulation tool is divided into five grades according to the heat resistance grade of the insulation material: A, E, B, F and H: Grade A: maximum allowable temperature ≤ 105°C; winding ■...

  • Page 342: Release Method Of High-Voltage System

    Emergency Release method of high-voltage system Manual release of MSD 1. Stop the vehicle with the shift lever engaged into P. 4. Find the low-voltage MSD in bonnet and remove it, and the vehicle will deactivate the high-voltage system automatically. Warning! Be sure to wear appropriate personal protective equipment ■...

  • Page 343: No Cutting Areas

    Emergency Caution! In an emergency, cut the black harness on the MSD, and the ■ vehicle will automatically deactivate the high-voltage system. In case of a vehicle collision, the high-voltage system will be ■ automatically released. No cutting areas High strength steel position If the vehicle body needs to be cut for rescue, be sure to use Airbag assembly the appropriate tools for cutting and wear appropriate protective...

  • Page 344: Rescue Of Wading Vehicle

    Emergency When HV components or wiring harnesses are 3. Seat belt retractor powered off. 4. Front side airbag 5. Central airbag To ensure the safety of rescuers, cutting is prohibited when the No cutting in the high voltage battery area. airbag is not deployed, but it can be done under the following conditions: When the front frontal and side airbags and curtain airbags have...

  • Page 345: Rescue Of Vehicle Or Fire

    Emergency After the rescue personnel remove the vehicle from the wading use sharp and hard tools to knock on the edge of the glass of ■ area, be sure to wait for the vehicle to dry completely before the door to help the passengers trapped in the vehicle break the carrying out corresponding operations to prevent electric shock.

  • Page 348: Data

    Data Vehicle identification Vehicle nameplate VIN located in the lower left corner of the windscreen Vehicle nameplate location The vehicle nameplate is located below the right B-pillar and can be viewed when the front right door is opened. The vehicle nameplate shows vehicle-related information. VIN location The VIN is the legal identification mark of a vehicle.

  • Page 349: How To Read Vin

    Do not connect other devices to the OBD-II socket. Unauthorized third parties may gain access to vehicle data, resulting in degraded performance of safety-related systems. Only equipment authorized by the Lotus authorized repairer is allowed to connect to OBD-II sockets.

  • Page 350: Drive Motor Model And Number

    Data Drive motor model and number The vehicle drive motor model and number are located on the drive motor label, on the right side of the bonnet cover plate and on the left side of the tailgate. Drive motor type 2 mark label position Drive motor type 1 mark label position Front drive motor label location...

  • Page 351: Microwave Window

    Data The microwave window is fixed horizontally in the centre, vertically upward position of the front windscreen. Information about the vehicle is stored in the microwave window. Please keep the front windscreen clean and prevent foreign objects from blocking the microwave window.

  • Page 352: Technical Parameter

    Data Vehicle chassis parameters Technical parameter Rear overhang (mm) 1104 Dimension parameters Performance parameters Vehicle outline dimensions Performance parameters Length (mm) 5103 Front electric engine TZ230XS225 TZ230XS225 Width(mm) 2019 model Wheel size: R20* 1630 Rear electric engine TZ230XS225 TZ264XY000 model Height(mm) Wheel size: R22*/ 1636...

  • Page 353: Drive Motor Parameters

    Data Vehicle mass parameters Vehicle mass parameters total LBMESEL mass) 1C52161 (kg) 2715 LBMESEL LBMESEL 1C42161 1C50000 ELETRE 2565 2980 1470 1730 LBMESEL BASE LBMESEL 3C52171 1C50010 ELETRE R 2745 3150 1470 1850 LBMESEL LBMESEL 3C42171 1C51020 2615 LBMESEL LBMESEL 3C52181 1C41020 2725...

  • Page 354: High Voltage Battery Parameters

    Data Drive motor parameters Seat parameters Rated torque（N.m) Peak power(kW) 5 seats Rated speed (rpm) 17,000 14,000 Front seat Rear middle Rear side seats Item adjustment seat adjustment adjustment Peak torque（N.m) Set seat Adjust forward fore and by 202.8, and High voltage battery parameters Not adjustable Not adjustable...

  • Page 355: Wheel Alignment Parameters

    Data 4 seats* Wheel alignment parameters Rear side seats Back inclination angle of kingpin Item Front seat adjustment 4.9±0.6 adjustment （°） Set seat fore Adjust forward by Inside steer angle（°） 40.6±2 and aft position 202.8, and adjust Adjust forward by 60 (mm) backward by 57.2 Outside steer angle（°）...

  • Page 356: Braking Parameters

    ≤10 fron Caution! Due to differences in wheel assembly, do not change the position of any wheel assembly to avoid vehicle damage or accidents. For Whee replacement, please go to a Lotus authorised repairer. side dyna ≤10 ≤10 ≤10 ≤10 ≤10...
  • Page 357 Data Braking parameters Braking parameters Brake Standard pedal free thickness ≤20 ≤20 ≤20 travel of front (mm) brake pad About 8.2 About 8.6 About 12.2 (excluding steel Standard back) thickness (mm) of front brake disc (mm) Minimum safe thickness When the carbon Minimum of front content is below...

  • Page 358: Fluid Specification And Capacity

    Data Braking parameters Fluid specification and capacity steel 10-piston back) braking 750±30ml (mm) system* Parking Electronic Electronic Electronic parking brake parking brake parking brake brake (EPB) type (EPB) (EPB) Fluid specification and capacity Fluid specification and capacity Name Model Filling amount Transmission TOTAL F20-03863K lubricant...
  • Page 359 INDEX INDEX Numerics 12V power supply ........Battery .
  • Page 360 Contact Lotus ........
  • Page 361 Lotus intelligent dynamic control(LIDC) ..Lotus security system V ......
  • Page 362 INDEX Prompts and illustrations ......Navigation ......... Necessity of maintenance .
  • Page 363 INDEX Safe parking ........Tailgate .
  • Page 364 INDEX Vehicle scrapping ........Vehicle use preference function ....VIN location .

Table of Contents

Save PDF